HI9682
HANNA HI9682 Sodium chloride refractive analyzerSPEC
HANNA HI9682 Sodium chloride refractive analyzerDetails
HANNA HI9682 Sodium chloride refractive analyzerPacking list
- SKU
- NB020663
- Salinity range
- 0~150 ppt (g/L)
- Salinity resolution
- 1 ppt (g/L)
- Accuracy @25 ℃ - salinity
- ±2 ppt：
- Salinity range
- 0~50 PSU
- Practical salinity resolution
- 1 PSU
- Accuracy @25 ℃ - practical salinity
- ±2
- Measurement range of specific gravity
- 1.000 ~1.114 S.G.
- Specific gravity resolution
- 0.001 S.G.
- Accuracy @25 ℃ - specific gravity
- ±0.002 S.G.
- Display range
- 0.0~80.0℃
- temperature resolution
- 0.1℃
- Accuracy @25 ℃ - Temperature
- ±0.3℃
- Calibrated mode
- Deionized water, distillation or ultrapurified water or zero-point calibrated
- Temperature compensation
- Automatic temperature compensation 0~40 ℃
- Measurement system
- Stainless steel measurement cell, LED yellow Light source, high quality quartz Glass refractive design
- Minimum sampling
- 100 µL to fully cover refractive measurement lenses
- Response time
- Up to 1.5 seconds to display measurement results
- Power supply type
- V battery, in Measurement mode, automatically shuts down after 3 minutes of use
- Protection Rating
- IP65
- Dimensions
- 192 x 102 x 67 mm
- Weight
- 420g
Applications
Seawater salinity measurement is important in many industries such as aquaculture, environmental monitoring, aquariums, desalination, groundwater and many more. Existing salinity measurement techniques to date.
All rely on mechanical instruments such as hydrometers, visual refractometers and high-tech conductivity meters. The visual refractometer is simple to operate, but it is difficult to obtain accurate readings and is easily affected by temperature.
Liquid specific gravity metering supplies are expensive, cumbersome and inaccurate. The use of conductivity meters to measure salinity is often limited due to high cost.
H196822 high-precision sodium chloride refractometer is used to measure the salinity of artificial and natural seawater, ocean or micro-water. After calibrating the zero point using deionized water, drop the sample onto the measuring cell and after a few seconds, the measurement results will be displayed. and temperature value.
Three salinity measurement units: practical salinity (PSU), thousandth salinity (pt, salinity specific gravity (SG), accurate measurement, simple operation, portable and waterproof design, suitable for laboratory and field use, is Excellent choice for seawater salinity measurement
Features
Special for seawater salinity analysis
High measurement accuracy, three reference unit readings:
Psu, ppt and specific gravity
Two-line LCD display
Temperature reading is displayed below the measured value
ATC
Automatic temperature compensation
BEPS
Low battery reminder to ensure accurate and effective readings
IP65 waterproof
Laboratory and field measurements
Fast and accurate measurements
Quickly display measurement results in 1.5 seconds
A little calibration
Calibrate with distilled or deionized water
Micro sample
Only 2 drops of sample required
Automatic shut-down
Automatically shuts down after three minutes
Stainless steel sample chamber
Easy to clean and anti-corrosion
Easy to operate
Just drop the sample and press the button to read, simple and fast
ABS heat shrinkable material carrying case