DongRu DR220 Coating Thickness Gauge Manual,OI

东如DR220涂层测厚仪操作说明书第1页

东如DR220涂层测厚仪操作说明书第2页

东如DR220涂层测厚仪操作说明书第3页

东如DR220涂层测厚仪操作说明书第4页

东如DR220涂层测厚仪操作说明书第5页

Continue to read

Related products

Defelsko F90S split 90 ° right angle probe measurement low headroom area
Magnetic Induction0~1150μm±1%

¥6090.0
SE
Defelsko PosiTector 6000 N90S3 Coating Thickness Gauge 90 ° probe eddy Current thickness measurement principle
Eddy Current0~625μm±3%

¥10840.0
SE
Defelsko PosiTector 6000 FNS3 Coating Thickness Gauge metal substrate Automatic substrate type identification and measurement
Magnetic Induction + eddy Current0~1500μm±1%

¥11650.0
SE
List Magnetik Pocket TOP-CHECK FN Pocket platings Thickness Gauge
Magnetic Induction + eddy CurrentFe；0~5000μm；NFe；0~2000μm±1μm/±1~5%

¥9500.0
SE
Defelsko PosiTector 200 C3 fiberglass concrete Coating Thickness Gauge
ultrasound50~3800μm±3%

¥22120.0
SE
Germany EPK MikroTest S10 McCourt rubber layer Thickness Gauge, thickness measurement: 2.5~ 10mm
mechanical2500~10000μm±5%

¥5820.0
SE
List Magnetik Pocket TOP-CHECK FE Pocket platings Thickness Gauge
magnetic Induction0~5000μm±1μm/±1~5%

¥6999.0
SE
Mattel MCT200 coated platings Thickness Gauge, thickness range 0~1250μm with F1 probe
Magnetic Induction + eddy Current0~1250μm±3%

¥2680.0
Defelsko FS conventional strip probe 0~1500μm/non-ferrous metal
Magnetic Induction0~1500μm±1%

¥3940.0
SE
JFL QDX film multi-purpose Detector film thickness, Hardness, adhesion and other performance detection
A. Cutting knife (1) 45 ° ± 1; b. Cutting knife (2) 26 ° 35, -1, -2; c. Cutting knife (3) 5 ° 40, + 3, + 2A. The spacing is: 1 + 0.01mm, 2 + 0.01mm; b. The straightness of the top of the ruler is: not less than 0.003mm, not less than 0.006mm; c. The working tooth tip angle: 30 ± 1 °R15+0.1mm

¥3450.0
SE

Recommended for more manual