Qiwei XZ-3 oil-free diaphragm Vacuumpump 35L/MIN

XZ-3

Oil Free Diaphragm Vacuumpump

Pumping rate 35L/min, vacuum pressure ≥ 0.75MPA, positive pressure/negative pressure, positive pressure, negative pressure, motor power 85w, vacuum, compression, dual-purpose Vacuumpump

Introduction

XZ-3 oil-free Vacuum Pump has the advantages of simple structure, easy operation, convenient maintenance, and no environmental pollution. And it has good durability. It is a dual-purpose Vacuum Pump for vacuuming, compression, and a basic equipment for obtaining vacuum in a wide range of applications. 

main feature

1. Electromagnetic motor is adopted, and the diaphragm seals the air chamber to ensure the one-way flow of gas and high vacuum degree.

2. Non-oil-pump design, the gas circulating in the air chamber is relatively isolated, no pollution, safe and explosion-proof.

3. The cylinder piston is made of new wear-resistant material, which has a longer service life.

4. Bag-style design, more convenient to use, better cooling effect.

5. Electrostatic spraying on the surface, stronger adhesion, anti-chipping and decolorization.

6. All Teflon material, anti-strong chemical corrosion Vacuum Pump, can be used to extract strong acid and strong salty gas, high-end products of laboratory pumps.

7. The vacuum gauge monitors the real-time vacuum degree, the maximum vacuum degree can reach 0.08Mpa, and it can be used for both positive and negative pressure (positive pressure type and pressure regulating type are optional).

8. No daily maintenance, long service life.

9. It has a wide range of applications; with corresponding equipment, it can be used for aerators, Nitrogen Evaporators, solid phase extraction instruments, thin-layer chromogenic sprays, solvent filters, atmospheric samplers and other various vacuum or positive pressure needs.

Precautions

1 Do not start with pressure.

2 Do not pump the liquid into the pump body, it is recommended to add a buffer bottle.

3 Do not start the machine continuously for more than 30 minutes.

4. The pump is not suitable for pumping out gases that are corrosive to ferrous metals, chemically react to pump oil, contain particles of dust, and have high oxygen content and explosive toxic gases. It cannot be used as a transfer pump (that is, pumped from one container to another).

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.