Germany IKA RC 2 controlled circulating chiller 1.4~ 4L

RC 2 control

Thermostat

Introduction

Effective and temperature-stable circulating chiller with unique wireless controller. Suitable for refrigeration applications down to -30°C with cooling power up to 400W. 

The speed-controlled PEEK pump continuously adjusts the pressure and flow rate. With a very good temperature stability of approx. ±0.05 K (at -10°C), the RC2 can meet even the most demanding applications. 

By connecting an external PT 100 temperature sensor, the temperature in the operating medium can be measured and controlled directly. The main unit is equipped with an external PT 100 temperature sensor as standard. 

With the Wireless Controller (WiCo), you can leave the device and operate the RC 2 safely and comfortably. 

The standard discharge port and switch allow for safe emptying of the heat transfer medium. The easy-to-remove front cover allows the user to easily clean the air filter. 

The excellent adiabatic 4 litre bath allows the use of up to 2.5 litres of hot fluid in the external cooling cycle without the need for refilling. 

Product configuration

Temperature range: -30 °C - RT

Temperature Fluctuation: 0.05 K

Large TFT display for clear indication of temperature, pump speed, liquid level and safe temperature

Intuitive level display

Drain valves and optimised baths for safe and efficient emptying

The air filter is easy to clean

Visual and audible safety alerts

Interface for connecting an external PT 100 temperature probe

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.