ERICHSEN322-4mm Viscosity Cup
ERICHSEN322-4mm
-
Rhopoint RL-A-FC-ISO4 ISO flow cup (4mm) BS EN ISO 2431, ASTM D5125$ 385.00SE -
MODERNER ISO-4 ISO Flow Cup inks Viscosity Cup -
JINGKELIAN QNB No.4 ISO Flow Cup outflow time 30s ≤ t ≤ 100s diameter 4mm$ 138.00SE -
Ander LND-2 (4 #) No. 4 ISO cup with bracket Viscosity range 35~ 135cst$ 189.00SE -
YONGLIDA QNB-ISO-4 ISO Flow Cup (including bracket) viscosity range: 34~ 135cst$ 164.00SE
Erichsen ERICHSEN322-4mm Viscosity CupSPEC
Erichsen ERICHSEN322-4mm Viscosity CupDetails
Erichsen ERICHSEN322-4mm Viscosity CupPacking list
- SKU
- NB021773
- Viscosity range
- 10~680cSt
- flow hole diameter
- 8mm
- Cup body material
- aluminum
- Applicable standard
- ISO 2431
Introduction
Immersion cups are used to quickly determine the viscosity of various liquid materials, such as: Paints, greases, food, etc. Practitioners appreciate their merits. The viscosity of a substance is the amount of time it takes for a measured amount (100 cc) to flow from a beaker through a fixed-diameter nozzle. This flow time is determined by a stopwatch. ISO immersion cups are based on EN ISO 2431.
Ordering Information:
Model | standard | Nozzle diameter | Measuring range (mm/s) |
243/I (phenolic) | Quite DIN53211 standard | 2mm 4mm 6mm 8mm | 22-55 90-682 300-1200 500-2000 243/II |
243/I (Aluminum anodizing) | Quite DIN53211 standard | 2mm 6mm 8mm | 22-55 300-1200 500-2000 |
243/II/4 (Aluminum anodizing) | DIN53211 SUV37110 SIS184115 | 4mm | 90-682 |
243/III (Aluminum anodizing) | ASTMD1200 | No.2 (2.5mm) No.3 (3.4mm) No. 4 (4.1mm) No. 5 (5.2mm) | 32-118 31-215 59-367 217-1185 |
243/VII (Aluminum anodizing) | ISO 2431 DIN EN ISO 2431 | 3mm 4mm 5mm 6mm | 8-42 34-135 91-325 188-684 |
- 1How to Use a Viscosity Cup for a Simple and Accurate Viscosity Test
- 2Introduction to the use and application of No. 4 viscosity cup
- 3Wood lacquer viscosity cup, principle, application and selection introduction
- 4Corrugated fibreboard starch viscosity cup its principle, application and selection introduction