MODERNER XB-6 Coating Bar WFT 6μm

XB-6

Mayer Rods

Introduction to XB-6 Wire Bar Coater

MODERNER XB-6 wire Bar Coater is a wire-wound wire Bar Coater with a coating film thickness of 4 microns and a coating width of 200mm. Made of stainless steel, it has good corrosion resistance. MODERNER XB series wire rod applicator can be used with a handle (need to be purchased separately), making coating easier and more effective.

Instructions

First, place the sample on the platform and fix it to ensure that the sample cannot move when the XB coating scraper passes over it.

Second, select the appropriate XB coating scraper according to the required wet film thickness and place it at the position specified on the sample.

Third, pour an appropriate sample in front of the xb coating scraper, hold the handle (need to be purchased separately) with your hand, and slide it at a constant speed of 150 mm/second, that is, apply a wet film with the required thickness.

Note: The XB coating scraper must be washed and dried with an appropriate solvent immediately after use to prevent the paint from drying out for too long and making it difficult to clean, causing blockage and affecting subsequent experiments.

Product actual pictures

Optional

Packing list：Mayer Rods X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.