United States

RDS 25 #3/8 "Mayer Rods WFT 57.2μm Length 400mm

SE
Wire-wound, wet film thickness 57.2μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.64mm.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 25# 3/8" Applicator rod 3/8 "SPEC

RDS 25# 3/8" Applicator rod 3/8 "Details

RDS 25# 3/8" Applicator rod 3/8 "Packing list

SKU
NB000022
Production process
wire-wound
WFT
57.2μm
diameter
9.52mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
Wire diameter
0.64mm
25# 3/8"
Applicator rod 3/8 "
Wire-wound, wet film thickness 57.2μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.64mm.
RDS 25 #3/8 "Mayer Rods WFT 57.2μm Length 400mm Picture

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10



FAQ
QHow many diameters does this RDS have? The smaller the diameter, the thinner the ink layer?
A Three diameters: 1/4 " (6.35mm), 3/8" (9.5mm), 1/2 " (12.7mm), the thickness of the film is the same, and the thickness of different rod number films is different.
QWhat is the Spreader width of the RDS bar in mm?
A Hello, 30cm film width.
QWhich model of wire rod should I choose for the 57μ po film?
A Hello, you can choose the No. 25 rod of RDS, and the film Film thickness is 57.2μm.
QWhat does the number 3/8 after RDS rod No. 25 mean?
A Hello, 3/8 is the diameter of the rod 3/8 inch, which is about 9.5mm.
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QDoes the RDS25 #3/8 "Applicator rod meet the ASTMD 4147 standard?
A Applicable, please consult the customer service of the mall for details about the ASTMD 4147 standard.
QSpreader nano silver wire solution, what type of scraper do you use?
A Hello, this depends on the wet film thickness or thickness of dry film you want to apply. If it is thickness of dry film, you need to convert the solid part into a theoretical wet film. It is recommended that you calculate according to < a href = "http://tool.nbchao.com/mohou" > wet film thickness calculator. Thank you for your consultation.
QWhat is the film thickness around Mayer-Rod 100?
A The maximum size of RDS around Mayer-Rod is 75. Does the 100 here refer to the RDS #44 rod? The Mayer-Rod can be coated with 100.6μm wet film.
QOptical inspection film coated wire rod
A Hello, these rods are OK, and you can choose according to your film Film thickness.
QIs the Film Applicator 40mm wide?
Knowledge
Standard
Filter Brand Store Contact