LICHEN CS-10B High Purity Water Machine RO Membrane Ultra Purified Water Machine
CS-10B
LICHEN CS-10B High purity water machineSPEC
LICHEN CS-10B High purity water machineDetails
LICHEN CS-10B High purity water machinePacking list
- SKU
- NB022406
- Flow Rate
- 10L/h
- Pure water quality
- Better than laboratory secondary water (≤ 0.6us/cm)
- inlet pressure
- ≥ 0.1 Mpa (1kg)
- Operating Environment
- Water temperature requirement 5~ 40 ℃
- Power
- 220V/50HZ
- Host size
- 540×350×860mm
- Packing Weight
- 40Kg
- power
- 25W
Product Description
CS series high-purity water generator adopts RO membrane reverse osmosis and anion exchange technology, selects imported materials, and prepares high-purity water based on the principle of selective permeability of ions, which can effectively remove organic matter, inorganic anions, cations, colloids, bacteria and other impurities in the water, and the effluent water quality meets the national laboratory water standard (GB6682-92), and finally achieves reagent-grade high-purity water without interference background.
Features
◇ Imported ion filtration membrane and high-pressure, silent pure water pump are adopted, the operation quality is more reliable, and the water quality is more extensive
◇ With system flushing function: before turning on the water every time, the system will automatically rinse for 18 seconds before the system starts to produce water
◇ With system protection function: when the water pressure is too low or there is no water, the equipment will automatically shut down, and the equipment will automatically start when the water source comes from the source
◇ High output, low energy consumption, low power consumption, water output of 20L/h, power consumption is only 50W, which is 1/300 of similar products
◇ Using professional water treatment technology, the ratio of high-purity water is about 40%, and the water consumption is low
◇ No need for electric heating pipe heating, no fouling, no need to clean
◇ No heat loss, the effluent does not need to be cooled at room temperature, and can be directly used in experiments
◇ Simple operation, easy maintenance, low operating cost
◇ Two-stage RO pre-desalination system (high salt content water quality selection)
◇ It has the function of upgrading water quality and water quantity
Series selection
| Model | CS-10B | CS-20B |
| Enter the power supply | 220V/50HZ | |
| power | 25W | 50W |
| Pure water is produced | 10L/H (varies with source water temperature 10°C~30°C) | 20L/H (varies with source water temperature 10°C~30°C) |
| Water temperature requirements | 5～40℃ | |
| Apply water pressure | ≥0.1 Mpa(1kg) | |
| Effluent standards | Better than laboratory secondary water (≤0.6us/cm) | |
| Dimensions | 540mm×350mm×860mm (L×W×H) | |
| weight | 40Kg | |