China

CHNSPEC CS-610A Colorimeter for Coatings, Spinning & weaving, Powders, Automotive, Hardware, Plastics, etc

Should 10mm test diameter, LED Light source to extend life, can simultaneously measure SCI and SCE, including camera viewing function, access to national metrology authentication; optional micro printer; USB transmission data, PC software control color data.
Model:
Certificate

CHNSpec CS-610A ColorimeterSPEC

CHNSpec CS-610A ColorimeterDetails

CHNSpec CS-610A ColorimeterPacking list

SKU
NB000239
Lighting method
D/8 (Scattering Light source, 8 degree Viewing Angle), SCI (including specular reflection component)/SCE (excluding specular reflection component) synchronous measurement function
Sensors
Dual Path Array Sensors
Available Light Sources
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30.DLF,NBF,TL83,TL84.U35
Measurement time
0.5s
Measurement caliber
Φ10mm
Spectroscopic reflectance Repeatability
Standard deviation within 0.08%
Operating language
Chinese, English
Interface
USB, Bluetooth (customizable)
Viewing Angle
CIE 2°/10°
Lighting source
CLEDs (Full Band Equalized Led Light sources)
Color difference formula
delta E * ab, delta E * CH, delta E * uv, delta E * cmc (2:1), delta E * cmc (1:1), delta E * 94, delta E * 00, delta Eab (Hunter), 555 shade classification
data storage
20,000 pieces of test data
Power supply Voltage
Unmountable lithium battery pack, dedicated DC adapter
display mode
Light spectrum chart/data, sample chromatic value, color difference value, pass/fail result, Color bias, display measurement area, historical data color simulation, manual input standard sample, generate test report
Operating environment
0-45 ℃, Relative Humidity 80% or less (at 35 ℃), no condensation
Storage environment
-25~ 55 ℃, Relative Humidity 80% or less (at 35 ℃), no water condensation
Dimensions
181*73*112mm
Weight
About 550g (without battery)
Integrating sphere size
Φ40mm
Wavelength range
400~700nm
wavelength interval
10nm
Measurement range
0~200%
Resolution
0.01%
Inter-instrument Agreement
ΔE*ab<0.2
Display
Full color true color screen
Chroma indicator
WI, YI, TI, homochromatic index MI, colour fastness, discoloration fastness, force, coverage, tinting strength, strength, ISO luminance, 8 Glossiness, A density, T density, M density, E density
Light spectrum Bandwidth
5nm
Color Space
CIE-L * a * b, L * C * h, L * u * v, XYZ, Yxy, reflectance, Hunter-lab, Munsell MI, CMYK. RGB. HSB
Battery life
Charging, repeability, continuous measurement 10000 times, 7.4V/6000mAh
Light source lifetime
10 years 3 million times
Color scheme
can be matched
UV Light source
No UV Light source
Repeatability of chromatic value
Delta E * ab 0.02, MAX Maximum 0.04
CS-610A
Colorimeter
Should 10mm test diameter, LED Light source to extend life, can simultaneously measure SCI and SCE, including camera viewing function, access to national metrology authentication; optional micro printer; USB transmission data, PC software control color data.
CHNSPEC CS-610A Colorimeter for Coatings, Spinning & weaving, Powders, Automotive, Hardware, Plastics, etc Picture

Introduction

ChromatographyCS-610 seriesThe Spectrophotometer is a Spectrophotometer with a universal D/8 lighting condition, which can not only measure the color difference between the sample and the standard sample, but also analyze the color value of the measurement object, and is equipped with a variety of measurement light sources.CS-610SpectrophotometerColor space with a variety of measurements.

Color Spectrum CS-610 Series Spectrophotometer is a portable color measurement analyzer that includes:CS-610Aand CS-610B, of which CS-610B can customize the caliber according to the actual needs of customers. In addition to being light to carry and easy to operate, CS-610 spectrophotometry is designed based on ergonomics, easy and convenient operation, and has a novel and fashionable appearance. In addition, the setting of the pre-positioning plate is adopted, which eliminates the need to use standard blackboards and whiteboards in the calibration process of traditional Colorimeters and Colorimeters. Compared with the traditional color Detector, the performance has been greatly improved, and it has the characteristics of superior performance and high cost performance among similar products at home and abroad. Widely used in factory and laboratory operations, this Spectrophotometer is sufficient for excellent color measurement in quality control in almost all application areas.

Benefits:

· Obtained domestic (CN) metrology certification

· Large-capacity storage space

· Extra-large TFT display

· Novel and stylish design based on ergonomics

· Simple operation mode, simple operation interface

· The pre-positioning plate design can easily cope with the CS-610A/B Spectrophotometer test alignment

· CS-610A uses LED light source for longer service life.

· Low-power design, high-capacity rechargeable battery configuration

· Simultaneous measurement of SCI (including specular reflection) and SCE (elimination of specular reflection)

· USB data is transferred, and the PC software controls the color data

· It can be connected to a micro printer for printing

· It has a camera framing function

CS-610 Spectrophotometer application

●Can be used in the laboratory, factory or field operation, enough to achieve good color measurement in quality control in almost all application areas;

●Lower price, get high-performance spectroscopic color management tools, to meet the urgent needs of small and medium-sized enterprises for high-end instruments;

●Built-in software with all the necessary color equations, standard light sources for different tasks, and a large number of industry- and application-specific indicators;

●The operating system supports bilingual interface in Chinese and English, and CHNSpec provides customized services for interface language according to the actual needs of customers.

Features

● Professional horizontal design, without any moving parts, avoids the jitter of CS-610A/B Spectrophotometer when handheld, and makes the test more accurate

● USB data transfer, PC software for host computer operation, so that your color control is more free

● Large storage space: 100 sets of standard samples can be stored, and the maximum number of test records under each group of standard samples is 200

● CS-610A/B Spectrophotometer can measure SCI and SCE at the same time, and display SCI/SCE data through LCD panel.

● 610A and 610B use 10mm, 4mm and 6mm measuring aperture respectively, and 610B can customize the caliber size according to user requirements.

Actual picture of the product

The 610A/B spectroscopic Tester measured the hole

The inner and outer packaging of the 610A/B spectroscopic Tester is a real shot

610A/B Spectroscopic Tester Configuration Checklist

610A/B Spectrophotometer  screen shot

Exterior drawing of 610A/B spectroscopic Tester

FAQ
QCS-610A What is the measurement caliber of this colorimeter?
A Hello, it is 10mm.
QI want to do a test on the GB/T1766 standard. Is this Colorimeter okay?
A Sure
QWhat is the color scheme in CS-610A?
A Hello, the color scheme system is a set of software that can calculate the formula, which is mainly used in the Coating industry.
QIf the CS-610A colorimeter is calibrated in black and white?
A Hello! Please refer to this step: When the CS-610A colorimeter screen appears "When placing the instrument measurement port in the black chamber", place the instrument measurement port on the black chamber and press the "Enter" button to calibrate. After the short beep "beep" sound, complete the black calibrate and press the "Test" button for measurement. The white calibrate is the same as this step.
Standard