| Interior Volume | 60L ±1L |
| Interior size | 300 * 500 * 400mm * 4pc |
| Temperature range | 15~65℃ |
| Temperature fluctuation | ≤ ±0.5℃ |
| Temperature Uniformity | ≤±0.8℃ |
| temperature resolution | 0.1℃ |
| Temperature control method | Indirect temperature control method of constant greenhouse |
| Humidity control range | 5~80% R.H. |
| Humidity fluctuation | ≤ ± 1% RH |
| Humidity Uniformity | ≤ ± 2% RH |
| Humidity resolution | 0.1% RH |
| Humidity control method | Dry and moisture proportional control method (external) |
| Background concentration | Formaldehyde ≤ 0.006 mg/m3 |
| Single VOC background value | ≤0.005 mg/m3 |
| TVOC background value | ≤0.02 mg/m3 |
| Air exchange rate | 0.2~ 2.5 times/hour (precision 2.5) to meet the test requirements of plastic surface layer (1 time/hour) |
| Center wind speed | 0.1~ 1.0 m/s meets the test requirements of plastic surface (0.1~ 0.3 m/s) |
| tightness | Cabin air leakage rate VL < 5% × air supply rate Vs |
| Equipment collection rate | ＞85 % |
| Relative positive pressure retention | 10±5 Pa |
| Cabin material | SUS304 mirror stainless steel 1.5mm, rounded corners, full welding and polishing |
| Enclosure Material | Q235A Cold rolled steel plate 1.5mm, surface electrostatic spraying, white |
| sealing material | Imported PTFE, fluororubber |
| Thermal insulation material | 80 mm, high density polyurethane foam |
| Human Machine Interface | Delta 10-inch color touch screen |
| Equipment control method | The following control methods can be realized: Local control: operate the device directly on the touch screen |
| Automatically record items | Automatically record the following items in the working cabin: ① Temperature ② Humidity ③ Pressure ④ Flow ⑤ Running time ⑥ System alarm can realize system control, program setting, dynamic Data Display and historical data playback, fault recording, alarm setting and other functions |
| Sampling interface | 2 per cabin (Φ8mm) |
| Noise | ≤60 dB |
| Power | AC380V 5KW |
| Humidification water | Distillation water |
| Replenishment cycle | > 30 days (continuous operation) |
Warranty days: 365 days
1. Warranty conditions: The warranty period of the instrument from the date of acceptance is 12 months of warranty for the whole machine, if the instrument is damaged (excluding wearing parts), it will be repaired or replaced by the manufacturer free of charge. If it is damaged due to human factors, the seller shall pay the cost of replacing the parts, and the manufacturer shall not charge a repair fee. When supplying, it is necessary to provide the original after-sales service commitment letter of the original manufacturer before acceptance, and the acceptance is qualified by the air tightness calibration in the industry to meet all the standards required by customers.
2. Response time: After the user reports the fault by phone, the response will be made within 2 hours, and the supplier's maintenance personnel will be present within 8 hours, and the fault will be repaired within 1 day. Major problems or other problems that cannot be solved quickly should be solved within one week or a clear solution should be proposed, otherwise the manufacturer shall compensate the user for the corresponding losses.
3. Training plan: The manufacturer provides on-site installation and commissioning or remote technical training services according to product requirements.