China

JFL Qxp 0-50 ISO Grindometer single-channe 0~50μm

The JFL ISO Grindometer Qxp 0-50 is a single-channe Fineness Gauge with a range of 0 to 50 microns and a recommended range of 15 to 40 μm. The Qxp 0-50 Grindometer is used to test the impurity particle fineness of pigments in Paints and paint pulps.
Model：
Certificate
Contact
Details SPEC VIDEO OI
Similar products

JFL QXP 0-50 GrindometerSPEC

JFL QXP 0-50 GrindometerDetails

JFL QXP 0-50 GrindometerPacking list

SKU
NB024716
range
0~50μm
Graduation
5µm
Scraper type
Single-channe
Number of grooves
1
Scale unit
μm
Scraper size
175mm*65 mm*13mm
Groove size
140*12.5mm
Drawdown blade size
90*40*6mm
scraper material
stainless steel
Drawdown blade material
stainless steel
Applicable standards
ISO1524、GB/T 1724-2019
Calibrated Certificate
without
Recommended range
15~40μm
QXP 0-50
Grindometer
JFL Qxp 0-50 ISO Grindometer single-channe 0~50μm Picture

Introduction

Jinfulun Qxp scraper Fineness Meter is manufactured in accordance with the relevant regulations of international standards ISO1524 and GB/T 1724-2019. It is used to measure the particle fineness of paint and related products. The scraper fineness is divided into single groove and double groove. .

Product Usage

The ink fineness plate is used to determine the fineness of pigments and impurities in paints and paint slurries.

Range selection

When the fineness is below 30um, an ink fineness plate with a measuring range of 50um should be used; when the fineness is above 30um, an ink fineness plate with a measuring range of  100um or 150um should be used.

plan

Jinfulun ISO scraper Fineness Meter Qxp 0-50

FAQ
QCan the Fineness of this scraper test the emulsion paint system?
A Fineness of emulsion paint is about 40-50um, it is recommended to use 0~ 100 range Fineness gauge
QWhich Pigment Fineness Test? Sample 10 g Printing ink pigments
A Is there any estimated Fineness? Generally Printing ink Fineness is relatively small
QCan all Fineness of Ground Gauges be tested in the JT/T821.3 standard?
A Not necessarily, but this QXP 0-50 Fineness of Ground Gauge can be considered.
QFineness of the sample I want to measure is around 45 microns, should I choose 0~ 50 μm or 0~ 100 μm?
A Hello, if you want to measure 45μm with this Fineness gauge, it is recommended that you choose 0~ 100μm or 0~ 150μm, which will be more suitable for you.
QScraper Fineness meter one path, to meet the ISO1524 standard, which is Jinfulun?
A Hello, Jinfulun's QXP Fineness meter is ISO standard. What is the Fineness range of microns you want?
Standard