Qiwei XW-18DL Vortex Mixer Jog/Continuous

XW-18DL

Vortex mixer

It has the functions of continuous, speed regulation, point vibration, flat plate type, bowl type, etc., and supports two running modes: jog and continuous; 58W power, rotational speed up to 2800rpm; suitable for liquid and solid mixing.

Introduction

The vortex mixer is mainly used for experiments such as solvent mixing, liquid-liquid extraction, protein precipitation, Chinese herbal medicine extraction, pesticide residue extraction, cell particle resuspension, plasmid extraction, etc. It is also used in pharmacokinetics, drug analysis, biochemistry, hospitals, feed testing, Indispensable mixing equipment for pesticide residue analysis, environmental analysis, commodity inspection, petrochemical and other laboratories. The mixer is suitable for test tubes, flasks, beakers, separating funnels and other vessels to hold liquids and solid powders for mixing. The mixing speed is dozens of times that of manual mixing, and the mixing is uniform and effective. Some insoluble drugs and dyes, such as erythromycin staining solution, are also very easy to mix. When the mixer is working, there is no need to stir and add magnetic elements to the mixed material, so it also avoids the mixed material from being affected by external pollution and magnetic field. The instrument is simple and reliable in structure, small in size, low in power consumption, and easy to operate. It is the right-hand man for the majority of scientific research personnel and laboratory operators. It integrates all the functions of continuous, speed regulation, point vibration, flat type, bowl type, etc.

Models

Steps

1. Put the vortex mixer on a stable working surface, turn on the power supply (220V 50Hz), and turn on the power switch.

2. Put the test tube to be mixed upright and lightly press it on the rubber rotating head. The instrument can be used for mixing liquid media, in jog mode for shaking of a single test tube, and in continuous mode for shaking of single or multiple test tubes.

3. When working with modules, in order to maintain balance and avoid large vibrations, all test bottles should be evenly distributed when bottling, and the solutions in each bottle should be approximately equal. If the number of containers is insufficient, the test bottles can be placed symmetrically or the test bottles filled with other equal volume solutions can be filled with empty spaces.

4. After the experiment is over, turn off the switch and cut off the power to ensure safety.

Packing list：Host X1, manual X1, warranty card X1, certificate X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.