SANSHEN FY50 Backpressure High Temperature Digester

FY50

Backpressure High Temperature Digester

• Features
  

• Made of stainless steel for durability;

• The inclined design of the control panel is convenient for observation and operation;

• The microcomputer program controls the heating and holding timer process;

• LED digital tube and indicator light, dynamic display of equipment operating status;

• The computer board has PID function, which can prevent temperature flushing by self-tuning and correction of heating parameters, and the temperature control accuracy can reach within ±0.5°C;

• Low water level automatic water replenishment function, and there is a sound and light alarm system, and the heating will be automatically restored after water replenishment;

• Gravity exhaust method design, pure steam environment in the cavity, reliable effect;

• Radial self-expanding silicone rubber sealing ring, good sealing effect and long service life;

• When the temperature exceeds the set value of 2°C, the heating will be automatically stopped, and the sound and light alarm will be given at the same time;

• The overpressure to 0.23MPa safety valve automatically discharges steam to protect the equipment;

• Provide the reverse pressure interface of the explosion-proof bag;

• The cold water spray device can accelerate the cooling rate of the internal object, and it only takes 8~10min to cool down from 135°C to room temperature; Air backpressure auxiliary device is available for users to choose;

• Improve the shortcomings of the traditional flexible packaging bag that is easy to break after high temperature heating;

• The drain valve can discharge the concentrated water in the barrel to prevent Graduation;

• The universal casters with brakes can be easily shifted and positioned;

• Immersion electric heating tube with high thermal efficiency.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.