China

LINSHANG LS125 Multi-probe UV radiometer host

SE
LINSHANG LS125 multi-probe UV radiometer host instrument weight of about 194 grams (including battery), host size length 148mm × width 76mm × height 26mm, display 240 * 160 dot matrix LCD, battery 4 AAA alkaline dry batteries, probe connection Push-pull self-locking (snap type) connector.
$247.00/set
PromotionLoading...
Coupon
Model:
Certificate

LinShang LS125 Multi-probe UV radioMeter hostSPEC

LinShang LS125 Multi-probe UV radioMeter hostDetails

LinShang LS125 Multi-probe UV radioMeter hostPacking list

SKU
NB026427
Instrument Weight
About 194 grams (including battery)
Host size
148*76*26mm
show
240 * 160 dot matrix LCD
Power Supply
4 AAA alkaline dry batteries
Probe Connectivity
Push-pull self-locking (snap-on) Connector
LS125
Multi-probe UV radioMeter host
LINSHANG LS125 Multi-probe UV radiometer host Picture

Introduction

Ultraviolet light includes the UVA band (320nm-420nm), the UVB band (280nm-320nm) and the UVC band (200nm-280nm). UVA band is mainly used in light curing, lithography exposure, ultraviolet light source, integrated circuit lithography and other industries; UVB is used in physiotherapy lamps and special UVB fluorescent lamps for lizards in health care places; UVC band, also known as short-wave sterilization ultraviolet rays, ultraviolet germicidal lamps emit UVC short-wave ultraviolet rays. Ultraviolet germicidal lamps are mainly used in disinfection and sterilization, pharmaceutical factory transfer windows, CDC and other occasions.

Linshang LS125 multi-probe UV radiometer host

Features    

1. The main unit and the probe are connected by aviation plugs, and one main unit can match 9 different UV probes.

2. Using professional digital probe technology, the probe is not easy to be disturbed and provides excellent measurement accuracy.

3. The instrument intelligently identifies the model of the probe, and the instrument adaptively displays the interface according to the probe type.

4. Rich statistical functions, real-time power value, maximum value, minimum value, average value, measurement time, energy value display at the same time.

5. Data recording: 9 sets of measurement data can be saved. Press the lock button during the measurement to save the maximum and current values during the measurement at the same time. And the shutdown data is still saved (except for removing the battery).

6. Ultra-low power consumption: the instrument will automatically shut down after 10 minutes without any operation, so as to avoid the loss of battery power caused by forgetting to shut down after the measurement, and protect the service life of the instrument.


LS125 multi-probe ultraviolet irradiance meter, using digital probe, plug-in design, one host can match a variety of probes, the instrument intelligently judges the model of the probe, according to the test of ultraviolet spectrum range, range, size of the measuring hole, application industry, etc., 9 different ultraviolet probes have been developed, each probe selection refers to the following figure:

Probe model

Spectral response

Application

UVC

230nm-280nm

254nm high-power ultraviolet germicidal mercury lamp intensity and energy test

UVC-WP

230nm-280nm

Water treatment 254nm germicidal mercury lamp intensity and energy test, waterproof 1 meter deep

UVC LED

200nm-400nm

220nm-320nm LED light source intensity and energy test

UVB

280nm-315nm

297nm, 308nm, 313nm and other UVB light source intensity and energy testing

UVA

315mn-400nm

UV curing, high-pressure mercury lamp intensity and energy testing

UVA -X1

260nm-400nm

Ultraviolet aging chamber, ultraviolet intensity and energy testing in solar rays

UVA LED

340nm-420nm

UV curing, UVA LED flood light intensity and energy testing

UVA LED - X1

340nm-420nm

UV curing, UVA LED spot light source intensity and energy testing

UVA LED - X3

340nm-420nm

Intensity and energy testing of low-power UVA LED light sources


FAQ
QLS125 UV Irradiometer, what is the appropriate test distance?
A 1. If it is to test the 254nm sterilization lamp, it can be performed according to the national operating standards. The instrument is placed in the center of the 30W UV Lamp straight lamp downward and vertical 1m for measurement. The irradiation intensity of the UV Lamp in use needs to be greater than 70μW/cm ² to be qualified. 2. Miscellaneous types of ultraviolet lamps have few national and industry standards, and the distance is generally determined according to their own needs. 3. How much data the instrument can measure is related to the distance between the Light source and the probe and the measurement angle of the probe. Due to different test requirements, we cannot give suggestions.
Standard