Specifications
| Interior size | 500*600*750mm |
| Temperature range | -60~150℃ |
| Alternating range | -60℃~85℃ |
| Temperature fluctuation | ≤±0.5℃ |
| Heating rate | -20→100℃≈35min;-40→100℃≈45min |
| Cooling rate | 25~-40℃≈50min;25~-60℃≈65min |
| display | Large screen touch screen temperature and humidity control instrument |
| Accuracy range | Setting Accuracy: temperature ± 0.1 ℃, indication Accuracy |
| Temperature transducer | Platinum resistance PT100Ω/MV |
| Heating system | Fully independent system, nickel-chromium alloy electric heating heater |
| Refrigeration system | Original French "Taikang", fully enclosed air-cooled compression refrigeration method |
| Circulatory system | Temperature-resistant and low-noise air-conditioned motor, multi-leaf centrifugal wind turbine |
| Enclosure Material | A3 steel plate electrostatic spray treatment |
| Inner chamber material | SUS304 stainless steel high quality mirror steel plate |
| Thermal insulation material | Polyurethane Rigid Foam, Ultrafine Glass Fiber Cotton |
| Door frame insulation | Double Layer High and Low Temperature Conditioning Silicone Rubber Door Seal |
| Timer | 0~9999 M, H adjustable |
| Safety Devices | Leakage, short circuit, over temperature, motor overheating, compressor overVoltage, overload, overcurrent protection |
| Power | AC280V ± 10% AC380V ± 10% 50Hz three-phase five-wire system |
| Environment temperature | 5~30℃ |
| Environment humidity | ≤85％R.H |
| Temperature Uniformity | ≤±2℃ |
Packing list
Host x1, multi-layer heating and defrosting with lighting Glass window x1 set, test rack x2, test lead hole φ50mmx1, manual x1, warranty card x1
After-sales instructions
Warranty days: 365 days
1. If the instrument and equipment are not artificially caused by product quality problems, the manufacturer provides 1 year free warranty service;
2. During the warranty period, the manufacturer will arrange to deal with the equipment failure caused by the quality of the product itself within 48 hours after receiving the notice;
3. Outside the warranty period, the manufacturer will maintain it free of charge, and only charge the cost of parts and the cost of the engineer's on-site travel;
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/26955/Specification.html , which is only used by users who purchase commodities from the NBCHAO.