FANGRUI XHT double-layer glass Viscometer matching thermostatic cup, optional accessories
SEThe FANGRUI XHT double-layer glass is a thermostatic clip cup used with Viscometer to meet the needs of temperature control. The tested capacity is 30ml.
$141.00/piece
PromotionLoading...
Coupon
Model：
XHT
FangRui XHT Double glassSPEC
FangRui XHT Double glassDetails
FangRui XHT Double glassPacking list
- SKU
- NB027198
- Capacity
- 30ml
- purpose
- Temperature Control Accessories
XHT
Double glass
Introduction
If the user already has a constant temperature bath with external circulation function, it only needs to configure a constant temperature jacketed cup to meet the temperature control requirements. The test capacity is about 300ml, and the upper and lower holes go in and out, and are connected to the constant temperature bath with a hose to achieve the purpose of temperature control.
The vacuum between the interlayers of the thermostatic cup is convenient for heat preservation. The thermostat cup is easy to clean and easy to use.
FAQ
QDo you have the double-decked glasses required by the GB/T22427.7 standard?
A
This XHT double-decked glass will do.
Knowledge
- 1Installation and use of Fangrui Rotational Viscometer No. 0 rotor
- 2How to choose a Rotational Viscometer? This is enough
- 3Principle characteristics and application analysis of spot inks viscosity Measurement Instrument
- 4Precautions for the use of Rotational Viscometer
- 5Definition and distinction between Newtonian and non-Newtonian fluids
- 6Viscosity, consistency and surface tension - what are these?
- 7The basic knowledge of viscometer is enough to read this article
- 8How to choose the right powder coating synthetic resin?
- 9Comparison table of rotor speed and test range of each model
- 10Basic concepts, principles and measurement methods of viscosity
Standard
- 1GB/T 14235.8-1993《Testing method for viscosity of pattern materials in investment casting》
- 2GB/T 22427.7-2008《Starch - Determination of viscosity》
- 3GB/T 18856.4-2008《Test methods for coal water slurry, Part 4: Determination of apparent viscosity》
- 4SN/T 2903-2011《Dangerous goods Viscosity of flammable liquids Capillary method, rotational viscometer method, force ball Viscometer method》
- 5SY/T 5377-2007《Electric rotational viscometer》
- 6JB/T 9357-1999《General technical conditions for laboratory rotational viscometers》
- 7GB/T 10247-2008《Viscosity measurement method》