LS Shakeout Wear testing machine
LS Shakeout Wear testing machine has a duct length of 36 inches (914mm) and an inner diameter of 0.75 inches (19mm). LS Shakeout Wear testing machine is used to test the abrasion resistance of organic coatings under standard conditions.
Model：
LS
Similar products
xiangmin LS Wear testing machineSPEC
xiangmin LS Wear testing machineDetails
xiangmin LS Wear testing machinePacking list
- SKU
- NB027711
- duct length
- 914mm
- inner diameter of conduit
- Ф19mm
- Dimensions
- 230*200*1500mm
- Machine Weight
- 25kg
LS
Wear testing machine
Equipment use
The Ls falling sand abrasion Tester is used to test the abrasion resistance of organic coatings under standard conditions. The wear resistance of the coating on the test plate is expressed by the wear amount per unit film thickness. The test method of this instrument complies with the American industrial standards ASTM D968-83 and JG/T133-2000. This instrument uses standard sand that meets standard requirements.
FAQ
QMeet ASTMD 968 shakeout Wear testing machine
A
LS shakeout Wear testing machine, please refer to
QHow long is the conduit of LS shakeout Wear testing machine?
A
Hello, the duct length of this shakeout Wear testing machine is 914mm.
QHow does the shakeout wear-resistant tester operate?
A
Hello, please refer to the operation manual on this product page for the specific use method of LS Falling Sand Abrasion Tester. If you have any questions, you can consult customer service online.
Knowledge
- 1Frequently Asked Questions about Wear Test
- 2What are the common test methods for coating wear resistance testing?
- 3What is wear resistance? What are the influencing factors? How to improve the wear resistance of coatings?
- 4Different methods for testing wear resistance of polymers
- 5Why use wear resistant coatings?
- 6What are the different methods of wear testing?
- 7Taber Wear Testing Machine and Quality Control Wear Testing Technology
- 8Application of shakeout Tester in aluminum surface coating abrasion resistance testing
- 9Application of shakeout Tester in organic polymer film abrasion resistance testing
- 10Basic Principle and Application Analysis of Asphalt Wear testing machine
Standard
- 1GB/T 23988-2009《Determination for abrasion resistance of - Coatings by falling abrasive》
- 2YS/T 1186-2017《Aluminum surface anodic oxide coatings and organic polymer films, shakeout tester for wear resistance performance testing》
- 3GB/T 8013.1-2018《Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings》
- 4SY/T 0315-2013《Technological specification of external fusion bonded epoxy coating for steel pipeline》
- 5GB/T 12967.7-2010《Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7：Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus》
- 6ASTM D 968-2017《Determination of abrasion resistance of organic coatings by shakeout method》
- 7JB/T 5364-1991《Sand treatment, cleaning equipment, painting technical conditions》