QTY-10A Paint Film Bending tester YONGLIDA

QTY-10A

Lacquer film cylindrical mandrel bending tester

The QTY-10A Paint Film Bending tester is used to evaluate the flexibility of the paint film, with eight different diameter shaft rods of 2, 3, 4, 5, 6, 8, 10 and 12mm.

Introduction of QTY-10A Paint Film Cylindrical Bending Tester

Yonglida QTY-10A Paint Film Cylindrical Bending Tester is a paint film flexibility tester developed according to GB/T6742-86, ISO1519-73, ASIMD522, DIN53152 standards . The flexibility of the paint film is evaluated by the ability of the materials to deform together without damage. QTY-10A Paint Film Cylindrical Bending Tester is equipped with 2, 3, 4, 5, 6, 8, 10, 12mm shaft rods with eight diameters.

Test Principle

Under the standard regulations, it is expressed by the minimum shaft diameter that does not cause cracking of the paint film after the test panel is bent out 180 degrees around the shaft within 1-3 seconds.

plan

Packing list：host X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.