Germany

Qnix 5500 eddy Current Thickness Gauge split 1.25mm

The Nix QNix 5500 eddy Current Thickness Gauge adopts a split strip line probe, the material is wear-resistant ruby, the thickness range of this QNix 5500 Thickness Gauge is 0~1250μm, and the LCD screen that can be automatically flipped is suitable for automotive lame plating, corrosion protection and other fields to test the thickness of the coating.
Contact
Details SPEC VIDEO CAT
Similar products

Qnix QNix5500+NFe1.2mm Coating Thickness GaugeSPEC

Qnix QNix5500+NFe1.2mm Coating Thickness GaugeDetails

Qnix QNix5500+NFe1.2mm Coating Thickness GaugePacking list

SKU
NB028227
Measurement principle
Eddy Current
Measurement range
0~1250μm
margin of error
±2~3%
Minimum measurement surface
Φ14.5mm
Minimum radius of curvature
R70mm
thinnest substrate
0.05mm
probe
Line probe
Probe size
Φ14.5*34.5mm
Probe material
Shell top stainless steel (1.4305); Shell bottom Trogramid ® (CX7323)
Probe Weight
11.9g
Unit display
μm
statistical function
MAX Maximum, MIN Minimum, Average, Standard deviation
Power Supply
2 * 1.5V (AA) alkaline battery
Standards
DIN EN ISO 2808，DIN 50981，DIN 50984，ISO 2178， BS 5411（3＆11），BS 3900-C5，ASTM B 499，ISO 2360， ASTM D 1400，ASTM D 1186，ASTM D 7091
Display screen
IPS-LCD, 2-inch, color, 350cd/m2, with a Viewing Angle of 70 ° in all directions.
Operating temperature
-20℃-70℃
Battery life
1 year (1 measurement per second)
Protection level
IP65
Shell material
Hard fiberglass * PA12 GF30
Machine Weight
132g
Machine size
136* 63*42mm
Storage temperature
-20~70℃
Maximum workpiece surface temperature for continuous measurement
80℃
Battery life
> 2 years
QNix5500+NFe1.2mm
Coating Thickness Gauge
Qnix 5500 eddy Current Thickness Gauge split 1.25mm Picture

The QNix 5500 Coating Thickness Gauge is a convenient, durable, and action-friendly instrument for:Modular version, the user can decide which probe to use and the cable. Just in case, remember to disconnect the power supply when replacing the probe!

Qnix QNix5500+NFe1.2mm Coating Thickness Gauge Detail Figure 1

Whether it's in industrial painting, task testing, corrosion protection or vehicle evaluation, the QNix5500 is designed to provide the fastest and most convenient way to measure coating thickness by simply turning on the machine and placing the instrument on the surface of the workpiece to obtain measurement data, without the need for a series of setup operations.


The large 2-inch color LCD with auto-flip makes it easier to read the measured values in any position, even in harsh lighting conditions. Such as bridge cavities and Water Tanks, or when working outdoors or in strong sunlight. The QNix5500 provides all the necessary statistical information about the current measurement series: the display of the mean, standard deviation, maximum and minimum measurements.


The proper design ensures safe contact and avoids erroneous measurements. For smaller contact areas or inclined components, simply use the probe cable and plug the QNix®5500 into the cable device for a few seconds (only available for the modular version). The angled cable connection makes it easier to work comfortably even when space is limited.


With one-button operation, you can reliably and quickly zero the workpiece on the substrate or on the supplied zero plate.


The right probe for every application – precise, with high accuracy over the entire measuring range: measuring ranges from 1.25 mm to 3 mm to 5 mm, Fe, NFe or dual probes can be used.

Qnix QNix5500+NFe 1.2mm Coating Thickness Gauge Detail Figure 2

FAQ
QDo you have the Coating thickness gauge required in GB/T4957 standard?
A This QNix5500 + NFe1.2mm Coating thickness gauge will do.
Knowledge
Standard