United States

JENCO 6810 portable pH oxidation reduction Tester

SE
3 in 1 pH electrode (6810P), -2~ 16/0.01 pH, -10~120 ℃ -1999~ 1999/1mV, two or three point correction, IP67 waterproof case
Model：
Certificate
Contact
Details SPEC CAT OI

JENCO 6810 pH oxidation reduction TesterSPEC

JENCO 6810 pH oxidation reduction TesterDetails

JENCO 6810 pH oxidation reduction TesterPacking list

SKU
NB002905
PH range
-2.00~16.00pH
PH measurement Accuracy
±0.01pH
Resolution
0.01pH
Temperature Measurement Range
-10.0~120℃
Impedance
>10^12Ω
Power
4 1.5 volt 7 #batteries
pH zero correction range
±90mV
pH slope correction range
±30%
Electrode type
3 in 1pH electrode
calibration data store
Yes.
Ambient Temperature
0~50℃
Automatic shutdown
Yes.
mV range
-1999~1999mV
mV resolution
1mV
mV measurement Accuracy
±1mV
Temperature Measurement Range
-10.0~120.0℃
Temperature Resolution
0.1
Temperature measurement Accuracy
±0.5℃
Shop Accessories
Temperature probe, three-in-one electrode, composite electrode (Glass), composite electrode (Glass) can measure viscous or greasy objects, strong acid and alkali, composite electrode (Glass), measurement of pure water
Allowable Relative Humidity
<90%
Temperature compensation method
Automatic/manual
6810
pH oxidation reduction Tester
3 in 1 pH electrode (6810P), -2~ 16/0.01 pH, -10~120 ℃ -1999~ 1999/1mV, two or three point correction, IP67 waterproof case
JENCO 6810 portable pH oxidation reduction Tester Picture

Introduction to JENCO 6810 Portable pH Redox Tester

This product has many features that allow users to obtain data quickly and accurately. Temperature compensation can be performed manually or automatically or using a temperature probe rod for automatic compensation. Up to 3-point calibration ensures accurate data. The rate electrode can be used when the pH electrode needs to be replaced.

Features

  1. Can display two large panels (display two data of pH, temperature or ORP at the same time)

  2. IP67 specification body, waterproof and dustproof shell (optional three-in-one

  3. pH/ref/temperature, the electrode can be used with this connector: IP67 applicable model)

  4. 2 or 3 point calibration

  5. Manual or automatic temperature compensation

  6. Buffer solution combination (US&NITS)

  7. Display electrode rate %

  8. Closure sensor and automatic locking

  9. Special voice reply button

  10. Shockproof rubber base


JENCO 6810 portable pH redox Tester

Optional

modelIntroduction
6810PThree-in-one electrode
GB700ERefillable glass pH combination electrode (routine measurement)
GB710EComposite electrode (glass), sticky or greasy objects, strong acids and alkalis
600CComposite electrode (glass) (pure water measurement)
6810ASTtemperature probe


FAQ
QMeet GB/T13531.1pH oxidation reduction tester
A 6810pH oxidation reduction tester, please refer to
Standard