Japan

TOKI TOKI TVB-25H Digital Viscometer Viscosity up to 120000000mP.s

SE
The TVB-25H digital display Viscometer comes standard with six different rotors from H2 to H7, with a test viscosity range of 100 to 120000000mP.s. The TVB-25H digital display Viscometer adopts button operation and has the function of automatic stop time and stop viscosity.
Model:

TOKI TVB-25H Rotational viscometerSPEC

TOKI TVB-25H Rotational viscometerDetails

TOKI TVB-25H Rotational viscometerPacking list

SKU
NB029319
Rotor specification
H2、H3、H4、H5、H6、H7
Rotor speed
0.01~100rpm
step
1001 steps, step 0.1rpm
Measurement mode
Manual, automatic stop time, automatic stop viscosity
Measurement memory
5 ways per mode
Viscosity display
%,mPa.s,Pa.s,kPa.s,cP/P
Measurement Accuracy
±1%F.S
Repeatability
±0.2%F.S
Measuring temperature
10~60℃
Interface
RS232C,USB
input signal
Measurement start signal (no Voltage contact)
Output signal
Measurement signal, beep signal, measurement end signal (when automatically stopped) Output signal is open collector electrode
Operating temperature
0~40℃
Allowable Relative Humidity
< 90% no condensation
Power
AC100- 230V;50-60Hz
power consumption
Less than 20W
Rotor material
stainless steel
Host size
105*220*320mm
Base size
290*300*450mm
Weight
About 8Kg (including bracket)
Range file
M、2.5M、5M
Torque
718.7μN·m、1437.4μN·m、5749.6μN·m、2156.1μN·m
Measurement range
100~40000000mP.s、100~80000000mP.s、400~320000000mP.s、150~120000000mP.s
TVB-25H
Rotational viscometer
TOKI TOKI TVB-25H Digital Viscometer Viscosity up to 120000000mP.s Picture

Introduction

The combination of "torque balance servo method" and "pivot-free structure" achieves good linearity and reproducibility of data. Automatic range adjustment derived from dynamic range makes the program measurement function more convenient to use.

The "pivot-free structure" that does not use jewel bearings ensures reliable linearity and reproducibility of viscosity values ​​over a wide measurement range.

The dynamic range is the biggest charm of TV-25/35 viscometer.

With one viscometer, the viscosity range can be expanded up to 8 times without having to replace the spindle, and the viscosity can be measured continuously.

Features

◆Torque balance servo method

Using torque balance and servo method, zero position measurement method is adopted. Even within a wide measuring range, it is not affected.

◆Multiple measurement ranges

The wide dynamic range enables multi-weight range measurement. The measurement range can be expanded up to 8 times, and continuous measurement is possible without replacing the rotor.

◆No pivot structure

A flexible hinge system replaces pivots and gems, resulting in a pivot-free structure.

◆Rotation speed

Increasing at a speed of 0.1 rpm, any rotation speed can be set between 0.1 and 100.0 rpm.

◆Automatic zero point correction and deviation correction

This automatic feature makes instrument calibration easy.

◆Measurement mode memory

Manual mode, automatic stop (time, viscosity) mode, each mode has 5 memory modes.

◆Auto stop

The measurement time and viscosity value can be automatically terminated.

◆Remote operation

The viscometer can be remotely operated to start and end measurement using external input signals. In addition, the output signal (collector open circuit) can be used to confirm the status of the viscometer by lighting and beeping.

◆Upper and lower limit alarms

When the upper and lower limit settings are exceeded, a buzzer will sound.

◆Preheating

The measurement can be started automatically after preheating according to the preset preheating time. The time until the measurement starts is displayed as a countdown.

◆Data exchange

It is interchangeable with conventional viscometer data and complies with JIS and ISO standards.

plan

Toki Industrial TVB-25H Rotational Viscometer details picture 1