TOKI TOKI RE-85H cone-plate viscometer 64.82~ 12960mPa · s

RE-85H

Viscometer

Introduction

The R85 viscometer is a viscometer with an automatic locking function in the standard configuration. It is a sister model of the popular R100 series. It is also a new model that combines ease of use and compact design. Of course, the automatic locking function is more reliable, so even novices who are using the viscometer for the first time can make measurements with peace of mind. The R85 model has two measurement methods: a single cylinder viscometer model RB-85 that uses a 500 ml beaker for measurement, and a cone and plate viscometer model RE-85 that can measure only a trace amount of 1 ml sample. Customers can choose the most suitable model according to their respective measurement purposes. In addition, there are .

Features

1.Auto lock

After the measurement is completed, the rotating shaft can be automatically locked to protect the pivot. Therefore, the rotor can be safely detached from the bearing without damaging the bearing. Even novices who use the viscometer for the first time can use it with confidence.

2. Setting of zero point and range

Differences between instruments are compensated during calibration, so the actual usage accuracy is higher than the accuracy stated on the sample.

3. Preheating and automatic stop

It has preheating and automatic stop functions. Preheating can also be used as an automatic start function. With the automatic stop function, the operation and stop of the viscometer can be set at any time.

4.Data exchange

The data measured by the R85 viscometer can be interchanged with other models of single cylinder and cone-plate viscometers produced by our company. It also complies with JIS standards and ISO standards.

5.Power lock

Even if the power switch is turned off during operation, the power will not be turned off until the bearing is locked.

6. Slow acceleration and slow deceleration during rotation

In order to prevent the viscometer from sudden impact, change the rotation speed smoothly when starting, changing, and stopping the measurement.

7.Alarm display

When the measured data is below 10%, or exceeds 100%, an alarm sign will be displayed and an alarm sound will sound.

8. Data recording

The R85 viscometer has a built-in calendar function. In addition to recording measurement data, a special printer can also be used to print the date and viscometer model.

Packing list：Viscometer X1, certificate of conformity, warranty card, manual

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.