United States

JENCO 3175-307A conductivity temperature Tester 0.000~199.9mS/cm

0~199.9 mS/cm; large backlit LCD display; CMC, CE and lead-free certification.
Model：
Certificate
Contact
Details SPEC CAT OI
Similar products

JENCO 3175-307A Conductivity temperature TesterSPEC

JENCO 3175-307A Conductivity temperature TesterDetails

JENCO 3175-307A Conductivity temperature TesterPacking list

SKU
NB002943
Conductivity range
0.000uS/cm~199.9mS/cm
EC resolution
0.001uS/cm;0.1mS/cm
Measurement Accuracy of conductivity
±0.5%FS
TDS range
0.000mg/L~199.9g/L
TDS resolution
0.001mg/L;0.1g/L
TDS Measurement Accuracy
±0.5%FS
Measurement range
0.0~100.0℃
Temperature Resolution
0.1℃
Measurement Accuracy
±0.3℃
Types of electrode constants
0.01/0.1/1.0/10.0cm-1
reference temperature
15.0~25.0 ℃ adjustable, the default value is 25.0 ℃
temperature coefficient
0.00~4.00% adjustable, the default value is 1.91%
TDS conversion factor
0.30~1.00, the default value is 1.91%
EC Temperature Compensation Range
Automatic/Manual 0.0~100.0 ℃
power failure correction memory
Yes.
Power Supply
6X1.5V7 battery or 115/230V AC power converter
Environmental temperature
0~50℃
Protection level
IP-54
Weight
504G (without battery)
Shop Accessories
K = 0.01cm-1 electrode (ultrapure water measurement), K = 0.1cm-1 electrode (pure water measurement), K = 10.0cm-1 electrode (high conductivity medium)
Working Relative Humidity
<90%
size
203mm x 105mm x 72mm
3175-307A
Conductivity temperature Tester
0~199.9 mS/cm; large backlit LCD display; CMC, CE and lead-free certification.
JENCO 3175-307A conductivity temperature Tester 0.000~199.9mS/cm Picture

Introduction

Basic experimental instrument, novel appearance, good quality, reasonable price. It is widely used in teaching laboratories of major universities, factories and enterprise laboratories, etc. Different samples can be measured with different electrodes.

Features

  1. Extra-large backlit LCD, conductivity/TDS and temperature display

  2. Single-point correction, with power-off correction value memory function

  3. Two-wire conductivity electrodes with four cell constants: 0.01, 0.1, 1.0 and 10.0 are available

  4. AC and DC dual-purpose power supply

  5. The products are CMC, CE and lead-free certified


    Ren's JENCO 3175-307A Benchtop Conductivity Temperature Tester

FAQ
Q3175-307A Conductivity detector temperature tester how to configure standard solution?
A Hello, regarding the standard solution configuration of Ren's 3175-307A, it is recommended to read the operation manual of this product.
QHow does the JENCO 3175-307A replace the battery?
A Hello, how to replace the battery: 1. Break open the battery cover buckle with both hands and remove the battery cover. 2. Take out the old battery and install the new battery. When replacing, please note that the battery polarity should be placed correctly. 3. Put back the battery cover and make sure the buckle is tight.
QHow many Conductivity detector constants does the electrode of JENCO 3175-307A have?
A Hello, the two-wire Conductivity detector electrode of this Ren's Conductivity detector temperature tester can choose two-wire Conductivity detector electrodes with four electrode constants of 0.01, 0.1, 1.0 and 10.0.
Standard