KairDa NDT650 Ultrasonic Flaw Detector brochure

Related products

Handheld Leeb Hardness Tester KAIRDA NDT280 Metal shell Durable Hardness Gauge
30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

SE
KAIRDA NDT130 Portable Color Screen Roughness Gauge Roughometer
Z-axis (vertical) 160μm, X-axis (horizontal) 17.5mm (0.69inch)Z-axis (vertical): 0.002μm/+/- 20μm, 0.004μm/+/- 40μm, 0.008μm/+/- 80μm2,4 inch IPS/320X240 dot matrix

¥3520.0
SE
KAIRDA NDT160 Roughness Gauge split surface roughness Tester
digital displayRa,Rz,Rq,Rt，Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr; Ry(JIS);Rmax，RPc，Rk，Rpk，Rvk，Mr1，Mr2Z-axis (vertical): ± 80μm/± 160µm (enhanced); X-axis (horizontal): 20mm

SE
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

SE
KAIRDA NDT150A Surface Roughness Tester
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μmRa、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2

¥3780.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS110 Curved Probe
curved probeCylindrical curved surfaces with a measurement radius greater than 3mm

SE
KAIRDA F10 Large Range Probe NDT530 Coating Thickness Gauge optional probe
magnetic induction0 ~ 10000μmprobe

¥1650.0
SE
KAIRDA NDT650 Ultrasonic Flaw Detector high gain 130dB intelligent calibrating
0~10000mm0.4MHz20MHz≤3%

¥9380.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
Portable Leeb Hardness Tester KAIRDA NDT230 Plastic Housing Richter Hardness Test Meter
170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HV30 ~ 110HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

SE

Recommended for more brochure