CQX CQ-J20 multifunctional gel time meter
SECQX multifunctional gel time meter CQ-J20 can simultaneously test the gel time and melting flowability of powder coatings, Temperature range + 10 ℃~ 300 ℃, CQ-J20 gel time meter adopts PID intelligent temperature control instrument, with automatic thermostatic function.
$972.00/set
PromotionLoading...
Coupon
Model：
CQ-J20
CQX CQ-J20 Gel time meterSPEC
CQX CQ-J20 Gel time meterDetails
CQX CQ-J20 Gel time meterPacking list
- SKU
- NB030054
- Temperature range
- RT+10~300℃
- Temperature control Accuracy
- ±1℃
- Rated Power
- 800W
- Voltage
- 220V
- Up to 200 ℃ heating time
- About 20 minutes
CQ-J20
Gel time meter
Introduction
CQ-J20 multifunctional gelation time meter is suitable for measuring the gelation time of powder coatings and raw materials. Epoxy resin and its products, polyester resin and other products that need to detect their gelation time are used. In addition, the instrument integrates multiple functions such as powder coating tilt plate flow test and powder coating horizontal flow test. The working platform of this product uses high-quality copper plates, long-life heating tubes, PID intelligent temperature controller, automatic constant temperature, easy to use, and accurate temperature.
FAQ
QCan it be fully automated, automatically glued, and automatically tested?
A
There is no such function on the market yet.
QIn addition to testing the gel time, this one can also test the flow length, right?
A
Yes!
QWhat is the capacity of the pit?
A
This groove is opened according to the standard, with a diameter of 16mm and a depth of 10mm.
QISO 8130.6, does it meet this standard?
A
Our gel time meter meets this standard
QCan this measure liquids?
A
There is a small groove in the middle, and the liquid can be measured.
QWhat is the maximum time range that Timer can display?
A
Time can be counted by seconds or hours. In time and division mode, the maximum is 9999 hours and 59 minutes. Hours, minutes; hours, minutes, seconds; minutes, seconds, milliseconds, three modes can be switched.
QWhat is the maximum time range that the CQ-J20 Timer can display?
A
This can be counted by seconds and hours. According to the time division mode, the maximum is 9999 hours and 59 minutes. There are three modes to choose from.
QHow is this gel time meter measured?
A
Hello, this gel time test is to put 0.25Ml powder in a round hole, melt wire drawing test, melt the powder into a sheet, put it on a inclined copper plate, and see his melt flow length.
QWhat is the difference between the two gel time meters? CQ-J12 and CQ-J20
A
Hello, Chengqixin's two livering instruments J12 only test the livering time, and J20 can measure the livering time and melt flow.
QIs this epoxy-polyester powder coatings for railway passenger car parts?
A
Yes!
Knowledge
- 1Testing of horizontal fluidity of coating powder
- 2Coating powder storage stability testing
- 3Application of ultra-fine coating powder
- 4Coating powder mass performance testing
- 5Determination of Gelatinization Time of Powder Coatings by Gelatinizer
- 6Coating drying time, gelling time and curing time
- 7Preparation and production process of transparent coating powder
- 8Determination of livering time
- 9Detailed application of gel time meter in paints and coatings detection
- 10Preparation and weathering resistance of fluorinated polyester for coating powder
周韦明，杨兆攀 - 《安徽神剑新材料股份有限公司》
Standard