China

JININGCHAOSHENG TR200 Surface Roughness Tester

Model：
Contact
Details SPEC

JiNingChaoSheng TR200 Surface roughness meterSPEC

JiNingChaoSheng TR200 Surface roughness meterDetails

JiNingChaoSheng TR200 Surface roughness meterPacking list

SKU
NB003022
Measurement parameters
Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr
Measurement range
Ra:0.025~12.5μm
Resolution
0.001μm
Error of indication
≤±10％
Indication variability
≤6％
Sampling length
0.25Mm | 0.8mm | 2.5mm (Automatic)
evaluation length
1L~ 5L (optional, L is the sampling length)
Stroke length
17.5mm/0.7inch
Dimensions
140*52*48mm
Product Weight
440g
Operating Conditions
Temperature: 0 ℃ - 40 ℃, Relative Humidity: < 90%
Display range
Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100%
Range
±20μm、±40μm、±80μm
filter
RC、PC-RC、GAUSS、D-P
Minimum drive stroke length
1.3mm/0.052inch
tip angle
90°
Display mode
128 × 64 dot matrix liquid crystal (with backlight)
TR200
Surface roughness meter
JININGCHAOSHENG TR200 Surface Roughness Tester Picture

Introduction of TR200 Surface Roughness Tester

● Menu operation modeTR200 Surface Roughness Tester

● It has the function of graphic display

● Sensor stylus position indication

● Automatic shutdown with storage function

● Multi-language Operating Mode selection

● High-precision inductive sensor

● 13 roughness parameters can be measured and displayed

● DSP (Digital Signal Processor) is used for data processing and control, with fast speed and low power consumption

● Mechatronics design, small size, light weight, easy to use

● High quality lithium-ion rechargeable battery, high capacity, no memory effect, continuous working time is more than 20 hours

● Connected to the TA series printer, the measurement parameters and contours can be printed

● Standard RS232 interface, which can communicate with PC

● Curved surface sensor can be used to measure the curved surface, small hole sensor to measure the inner hole wall, and groove/deep groove sensor to measure the roughness of the bottom of the groove or step

TR200 Surface Roughness Tester Parameters

Measurement parameters

Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr

Measuring range

Ra:0.025-12.5μm

Display range

Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm
RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100%

Measuring range

±20μm、±40μm、±80μm

Highest display resolution

0.001μm

Filtering

RC、PC-RC、GAUSS、D-P

Sampling length

0.25mm, 0.8mm, 2.5mm, automatic

Evaluate the length

1L-5L (optional), L is the sampling length

Measure the stroke length

3L-7L(optional)

Maximum drive stroke length

17.5mm/0.71inch

Minimum drive stroke length

1.3mm/0.052inch

Indication error

≤±10％

Variability of the indication

≤6％

Tip angle

90°

How it is displayed

128×64 dot matrix LCD (with backlight)

Operating Environment

Temperature: 0℃- 40℃, Relative Humidity: <90%

weight

440g

Dimensions

140×52×48mm

Basic configuration: main unit, TS100 standard sensor, power adapter, multi-line template, sensor sheath, bracket

Optional : TS110 Curved Surface Sensor, TS120 Small Bore Sensor, TS130 Groove Sensor, TS131 Deep Groove Sensor, TA610 Measurement Platform, TA620 Measurement Platform, TA630 Micro Adjustment Platform, TA631 Micro Adjustment Platform, TA230 Micro Printer, Lateral Adapter, Extension Rod, V-Block, Connector Parts, Driver Connecting Shaft, PC Software



FAQ
QI want to do a test on the QB/T2693 standard, is this surface roughness meter okay?
A Sure
Knowledge
Standard