LEICI JPSJ-605F Dissolved Oxygen Meter +/- 0.30mg/L
SE
JPSJ-605F
LeiCi JPSJ-605F Dissolved Oxygen MeterSPEC
LeiCi JPSJ-605F Dissolved Oxygen MeterDetails
LeiCi JPSJ-605F Dissolved Oxygen MeterPacking list
- SKU
- NB030266
- Instrument level
- ±0.30mg/L
- Measurement parameters
- Dissolved oxygen concentration, dissolved oxygen saturation, dissolved oxygen current and temperature value
- DO range
- Electronic unit: (0.00~99.99) mg/L Measurement range: (0.00~50.00) mg/L
- Resolution
- 0.01 mg/L
- Electronic unit error of indication
- ±0.10mg/L
- An indication of instrument error
- ±0.30mg/L
- Response time
- ≤ 45s (90% Response at 20 ℃)
- Salinity compensation error
- ≤±2%
- DO% Measurement range
- 0.0~600.0%
- Resolution
- 0.001
- Electronic unit error of indication
- ±2.0%
- An indication of instrument error
- ±10.0%
- Measurement range
- -10.0~135.0 ℃
- Resolution
- 0.1 ℃
- Electronic unit error of indication
- ±0.1 ℃
- An indication of instrument error
- +/- 0.3 ℃ (0.0 ℃ -60.0 ℃）； +/- 1.0 ℃ (Miscellaneous range)
- Power Supply
- DC24V，2.7A
- Dimensions
- 216*190*63mm
- Weight
- 0.95kg
JPSJ-605F dissolved oxygen Tester is mainly used for the determination of dissolved oxygen content or concentration in water by tap water source monitoring, aquaculture farms, environmental protection, sewage treatment plants, beverage industry and scientific research units.
Features
● Adopt color high-definition LCD screen, clear display
● Temperature units are optional: °C and °F.
● Support self-diagnosis, automatic shutdown, power-off protection and factory reset functions
● Support firmware upgrade function, allowing function expansion and personalized requirements
● Support IP54 protection level
● Polarographic dissolved oxygen electrode, electrode holder and dust cover are standard
[Intelligent detection, automatic identification]
● Intelligent endpoint discrimination, support automatic reading, timed reading, timed interval reading, and manual reading
● Support automatic temperature compensation, automatic atmospheric pressure compensation (kPa, mmHg, atm and other units are optional)
● Automatic zero oxygen calibration and full calibration
● Support manual salinity compensation
[Data management, information traceability]
● Support data storage (500 sets each), view, delete, transfer and print
● Comply with GLP and realize data traceability
● With RS-232 interface, it supports connecting to a standard RS-232 serial printer, and directly prints the measurement results, and the printing format is optional
● It has a USB interface, which can be connected with a PC through a dedicated communication software to realize data transmission
- 1The correct operation method of the dissolved Oxygen Meter [including five-minute video demonstration]
- 2What type of electrode can be used to measure dissolved oxygen?
- 3How to choose the dissolved oxygen measurement method: optical method, current method, polarographic method?
- 4Ren's JENCO 9010M dissolved Oxygen Meter instruction manual
- 5ONSETHOBO U26-001 dissolved oxygen Recorder for monitoring dissolved oxygen in endangered mussel habitat
- 6Water quality, water treatment method and explanation of water treatment terms
- 7The principle and main functions of STIP-scan
- 8Introduction to STIP-scan function and principle
- 9ANLELIS DO410 Benchtop dissolved Oxygen Meter Concise operation guide
- 10Differences between several common water quality testing equipment
- 1JJF 1714-2018《Program of Pattern Evaluation of Low-level Dissolved Oxygen Meters》
- 2JJF 1565-2016《Calibration Specification for Water Quality On-line Analyzers of Heavy Metals》
- 3JJF 1441-2013《Program of Pattern Evaluation of Dissolved Oxygen Meter With Covered-Membrane-Electrode》
- 4JJG 2104-2024《Calibration Specification for Seawater Dissolved Oxygen Analyzers》
- 5HJ 925-2017《Technical requirement and test procedures for portable dissolved Oxygen Meter》
- 6 096-2007《Test method of seawater dissolved oxygen analyzer》
- 7SC/T 7006-2001《Dissolved Oxygen Meter》
- 8GB/T 12157-2007《Water for industrial circulating cooling system and boiler -Determination of dissolved oxygen》
- 9GB/T 20245.4-2013《Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors》
- 10GB/T 12157-2022《Determination of dissolved oxygen in water for industrial circulating cooling system and boiler》