LEICI JPSJ-605 Dissolved Oxygen Meter
SE
JPSJ-605
LeiCi JPSJ-605 Dissolved Oxygen MeterSPEC
LeiCi JPSJ-605 Dissolved Oxygen MeterDetails
LeiCi JPSJ-605 Dissolved Oxygen MeterPacking list
- SKU
- NB030267
- DO range
- 0.00~19.99mg/L
- DO% Measurement range
- 0.0~200.0%
- Measurement range
- （-5.0~105.0）℃
- Measurement parameters
- Dissolved oxygen, dissolved oxygen saturation, temperature
- Error of indication
- ±0.30mg/L
- DOS resolution
- 0.01mg/L
- DO% resolution
- 0.1%
- Temperature Resolution
- 0.1℃
- DO intrinsic error
- ±0.10mg/L
- DO% intrinsic error
- ±1%FS
- Temperature intrinsic error
- ±0.3℃
- atmospheric pressure compensation
- Manual (77.0~110.0) kPa
- Salinity compensation range
- Manual (0.0~40.0) g/L
- Temperature compensation range
- Automatic (0.0~40.0) ℃
- Power Supply
- DC universal Power Supply (9V, 800mA, internal positive and external negative)
- Dimensions
- 290*200*70mm
- Weight
- About 1kg
Introduction
JPSJ-605 dissolved oxygen Tester is equipped with dissolved oxygen electrode, which can be used for the determination of dissolved oxygen in water by tap water source monitoring, aquaculture farms, environmental protection, sewage treatment plants, beverage industry and scientific research units.
Features
●LCD display, Chinese operation interface;
●It is permissible to measure several parameters: dissolved oxygen concentration value, dissolved oxygen saturation value, current value and temperature value;
●Support zero oxygen and full calibration, support electrode calibration reminder function; Support automatic temperature compensation; Support barometric pressure calibration and salinity calibration;
●Support the storage, deletion, review and printing of measurement data, and up to 50 sets of data can be stored;
●Standard RS-232 communication interface and REX data acquisition software；
●Power failure protection to keep your data safer；
●Automatic temperature compensation, support zero oxygen and full calibration as well as air pressure and salinity calibration;
●With data management function, the maximum storage capacity is 150 sets.
- 1The correct operation method of the dissolved Oxygen Meter [including five-minute video demonstration]
- 2The principle and main functions of STIP-scan
- 3Ren's JENCO 9010M dissolved Oxygen Meter instruction manual
- 4What type of electrode can be used to measure dissolved oxygen?
- 5Introduction to STIP-scan function and principle
- 6Definitions for Conductivity, Resistivity, TDS and Salinity Measurements
- 7Application value of dissolved oxygen Detector in brewery
- 8ANLELIS DO410 Benchtop dissolved Oxygen Meter Concise operation guide
- 9How to choose the dissolved oxygen measurement method: optical method, current method, polarographic method?
- 1JJF 1714-2018《Program of Pattern Evaluation of Low-level Dissolved Oxygen Meters》
- 2JJF 1565-2016《Calibration Specification for Water Quality On-line Analyzers of Heavy Metals》
- 3JJF 1441-2013《Program of Pattern Evaluation of Dissolved Oxygen Meter With Covered-Membrane-Electrode》
- 4JJG 2104-2024《Calibration Specification for Seawater Dissolved Oxygen Analyzers》
- 5HJ 925-2017《Technical requirement and test procedures for portable dissolved Oxygen Meter》
- 6 096-2007《Test method of seawater dissolved oxygen analyzer》
- 7SC/T 7006-2001《Dissolved Oxygen Meter》
- 8GB/T 12157-2007《Water for industrial circulating cooling system and boiler -Determination of dissolved oxygen》
- 9GB/T 20245.4-2013《Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors》
- 10GB/T 12157-2022《Determination of dissolved oxygen in water for industrial circulating cooling system and boiler》