LABTOP BHC 30 Immersion thermostatic circulator
BHC 30
labtop BHC 30 Immersion thermostatic circulatorSPEC
labtop BHC 30 Immersion thermostatic circulatorDetails
labtop BHC 30 Immersion thermostatic circulatorPacking list
- SKU
- NB030897
- Instrument type
- Bridge thermostatic Controller
- Protection level
- III/FL
- Protection level
- IP20
- Temperature range
- RT+10~220℃
- Temperature Fluctuation
- 0.02±K
- Temperature Display mode
- LED
- Temperature Control mode
- Intelligent PID control
- Temperature sensor
- Pt100
- Temperature sensor
- optional
- Heating power
- 3000W
- Pump type
- Pressure/suction pump
- Pump adjustability
- without
- Maximum pump pressure
- 0.3bar
- Maximum suction of pump
- 0.2bar
- Flow rate of pump
- 22L/min
- Pump connection interface
- M16x1
- Minimum bath depth required
- 150mm
- Dimensions
- (345~885)*200*336mm
- Temperature Resolution
- 0.1℃
- Light alarm
- Yes.
- audible alarm
- Yes.
- Temperature overrun alarm
- Yes.
- The temperature is not enough alarm
- Yes.
- secondary protection
- Yes.
- Low level protection
- Yes.
- Temperature range
- 0~260℃
- Calibrating options
- Yes.
- Allow continuous operation
- 100%
- Environmental temperature
- 5~32℃
- Allowable Relative Humidity
- 80%
- RS232 interface
- optional
- USB port
- optional
- Weight
- 10kg
- Power supply Voltage
- 200~230VAC/50Hz
- Input Power
- 3100W
- Instrument noise
- ≤45db
- Technical parameter standard
- DIN 12876
Description
The Immersion Thermostat/Controller is a multi-functional heating device that can provide heating, stirring, temperature measurement, temperature control and circulation, using a retractable bridge to easily and quickly install the instrument on any tank with a width of no more than 885mm, to achieve precise temperature control of the sample in the bath, combined with the cooling thermostat circulator, the lowest temperature is -20°C. All models are equipped with powerful pressure and suction pumps and comply with the DIN12876 standard safety class III (FL can be used with flammable liquids). The pump adapter can be used for external circulation temperature control, and the cooling coil is configured for connection to a cold water source.
Features
The retractable bridge allows the instrument to be easily mounted on different Water Tanks;
Powerful pressure/suction pumps;
Good stability of temperature control;
Meets safety class III.(FL) in the DIN12876 standard and can use flammable liquids;
Convenient for internal and external circulation applications;
High-low temperature alarm function;
Over-temperature automatic cut-off/anti-dry burning function;
Low level alarm function;
Multi-point calibration function;
When the alarm is raised, the light and sound are reminded at the same time;
Adjustable safety temperature range, safer to use;
A variety of communication interfaces can be configured (RS232/USB).
Serial models
| Model | Temperature range | Temperature Fluctuation | Heating power | Pump flow | Pump pressure | Pump suction | Immersion depth | Dimensions |
| [℃] | [℃] | [W] | [L/Min] | [bar] | [bar] | [mm] | (WxDxH) [mm] | |
| HC20E | RT+10...100 | ±0.1 | 2000 | 12 | 0.2 | 0.1 | 63...130 | 136x151x336 |
| HC30E | RT+10...100 | ±0.1 | 3000 | 12 | 0.2 | 0.1 | 63...130 | 136x151x336 |
| HC20 | RT+10...220 | ±0.02 | 2000 | 22 | 0.3 | 0.2 | 63...130 | 136x151x336 |
| HC30 | RT+10...220 | ±0.02 | 3000 | 22 | 0.3 | 0.2 | 63...130 | 136x151x336 |
| BHC20E | RT+10...100 | ±0.1 | 2000 | 12 | 0.2 | 0.1 | 63...130 | (345...885)x200x336 |
| BHC30E | RT+10...100 | ±0.1 | 3000 | 12 | 0.2 | 0.1 | 63...130 | (345...885)x200x336 |
| BHC20 | RT+10...220 | ±0.02 | 2000 | 22 | 0.3 | 0.2 | 63...130 | (345...885)x200x336 |
| BHC30 | RT+10...220 | ±0.02 | 3000 | 22 | 0.3 | 0.2 | 63...130 | (345...885)x200x336 |