CHINA ASR-5618B Mobile Drop Tester

ASR-5618B

Mobile Drop Tester

At the same time, 2 mobile phones are dropped, the test load is 2kg, the drop height is 60~150mm, the drop surface is aluminum material, the Film thickness is 12mm, and the baffle at the drop is reset; the number of buttons can be set to set the value, and the test can be automatically stopped.

Introduction

This machine is suitable for repeated drop tests of small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3, CD, and electronic dictionaries.

Action principle

The motor drives the upper clamp (air finger) down to clamp the mobile phone, rises, releases the air finger, and the mobile phone falls freely. Finger) down to clamp the phone, up to open the finger, the phone will fall freely, and so on until the set number of times.

Features

The number of times can be set to automatically stop

Drop surface material: aluminum, thickness 12mm. The baffle is reset at the point of drop.

Prompt function: can set the number of key presses to a fixed value, and can automatically stop the test.

This machine adopts Japanese Shinano Electric as the driving source for lifting and dropping the mobile phone, which is durable in use; it can realize the repeated drop of mobile phones and other products to test the impact resistance of products dropped from a certain height;

Due to the use of pneumatic components and autocratic control methods, the test speed and consistency are greatly improved; the display and control LCD touch control screen + PLC programmable controller is used for action program control; simultaneous counting, when the set number of times is reached, the test will automatically stop

Packing list：Host X1, manual X1, warranty card X1, certificate X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.