China TBJ-A3 bar Vacuum chuck Lab Film Applicator Electric coater
SESilent vibration-free motor, high film proofing effect Repeatability, touch operation to reduce manual external interference, Applicator rod flatness is high, using different viscosity materials, can be customized.
$2014.00/set
PromotionLoading...
Coupon
Model：
TBJ-A3
zy
Manufacturer authorization
Similar products
-
China bar Vacuum chuck coater TBJ-A3-XB with imported bar$ 2403.00SE -
HUINUO TM1200 Wire Bar film Coater with Vacuum Table$ 2713.00SE -
GB/T 9756 Paint Film Automatic Coating Machine with Vacuum chuck Polyester film finish coating board$ 3180.00SE -
China TBJ-A3 (custom) bar Vacuum chuck laboratory coater -
HuiNuo TM1200/02 bar vacuum adsorption coater effective area 600 * 1300mm
zy TBJ-A3 Automatic Film ApplicatorSPEC
zy TBJ-A3 Automatic Film ApplicatorDetails
zy TBJ-A3 Automatic Film ApplicatorPacking list
- SKU
- NB031407
- Coating method
- bar
- Mayer Rod Thickness Range
- 1-571.5 μm (Spreader thickness according to bar model)
- Mayer Rod Accuracy
- ±0.001mm
- Coating size
- 300 * 400Mm (Miscellaneous size can be customized)
- Coating speed
- 5-200Mm/s (< 5mm/s can be customized)
- Spreader distance control
- The number can be set arbitrarily within the range of 1-400mm
- Vacuum pump configuration
- external
- Vacuum Area
- 300 * 400Mm (can be customized)
- vacuum aperture
- Φ1.2mm
- Vacuum pump size
- 380*180*280mm
- Substrate clamping method
- Vacuum adsorption
- Control mode
- Touch screen control
- Total power consumption
- 2060W
- Host Power Supply
- 220V 50Hz
- Dimension
- 690*410*520mm
- Net Weight
- 65Kg
- Bottom plate material
- aluminum alloy
- Optional Accessories
- Substrate fixture, trimming horizontal height support foot device, Glass plate, Silicone pad and Weight (for applications with uneven substrate thickness of Spreader), application width control baffle
- customizable function
- Automatic lame plating device, UV curing device, automatic inking system, air knife drying, remote control, upper infrared heating, double extrusion Spreader
TBJ-A3
Automatic Film Applicator
Silent vibration-free motor, high film proofing effect Repeatability, touch operation to reduce manual external interference, Applicator rod flatness is high, using different viscosity materials, can be customized.
The touch laboratory TBJ-A wire rod coating testing machine is a newly upgraded product that is carefully designed to coat precise wet films on different substrates. It can repeatedly and continuously prepare smooth, flat and flawless coatings. After testing samples, the equipment has been favored by many familiar companies, research and development institutions, and colleges and universities after it was put into the market.
Optional
|
|
|
FAQ
QThe solution slurry is filled or penetrated into the porous base membrane, the porous membrane is the cellulose filter membrane, and the solution is PEO.
A
This one does not meet the requirements.
QMainly in the aluminum foil film 1um or less, usually coated with 2 microns, solid content 10%
A
Vacuum adsorption + wire rod
QIt is to apply double-sided rubber on glass fiber cloth and proofing on both sides at the same time
A
Proofing can only be done on one side.
QWhat is the allowable viscosity of the Spreader material for this coater?
A
The allowable range of film viscosity is generally determined by the Moulding device. The viscosity of the wire rod generally does not exceed 1000cp, and the doctor blade has no limit. But the accuracy of the wire rod is higher. In addition, due to the heating function, the viscosity of some materials decreases with the increase of temperature, so it is necessary to comprehensively consider the requirements of materials, substrates, film thickness and preparatory purposes. For details, please consult NBchao customer service.
QIs it possible for this wire rod coater to discharge automatically?
A
Hello, this one doesn't work. The other experimental coater can be automatically fed.
QWhat should I do if the film prepared on the experimental automatic film machine is difficult to peel off from the Glass substrate?
A
Hello, there are two solutions: first, the baseplate is replaced by PTFE material, PTFE has release properties; second, Teflon solution can be coated on the Glass substrate, and then film liquid after drying.
QCan TBJ-A3 Wire Bar Vacuum adsorption Spreader be used for Lithium Battery Spreader?
A
Hello, it's OK.
Knowledge
- 1Application of Vacuum adsorption Spreader Technique in Preparative Fluorescence Film on Release Membrane
- 2Study on Experimental Technique of Automatic Film Applicator for Filtered Glass
- 3Application technology and optimization of wire-rod Film Applicator on non-woven fabric
- 4Technical principle and operation precautions of water-based composite rubber coater
- 5Application Experiment of Automatic Film Applicator for Spreader Chitosan Film
- 6Hydrogen fuel cell membrane electrode film preparatory process and performance evaluation method
- 7Pharmaceutical Film Applicator Technology Analysis: Key Equipment for Drug Coating
- 8Application of wire rod coater in hydrogen battery separator prepative
- 9Selection and Technical Analysis of Laboratory Film Applicators in Liquid Crystal Dimming Film
- 10Lab Film Applicators for prepative polypropylene (PP) nitrile films
Standard
- 1GB/T 41515-2022《Coating machine vocabulary》
- 2GB/T 1727-2021《General methods for preparation of coating films》
- 3HG/T 3355-2003《Various colour nitrocellulose primer》
- 4GB/T 9756-2018《Synthetic resin emulsion coatings for interior wall》
- 5ASTM D823-2018《Paints, varnishes and related products of uniform thickness on the test board》