Netherlands TQC GL0030 Gloss Meter 20 °/60 °/85 ° Three-angle high-precision Glossiness Testing Instrument

GL0030

Gloss Meter

Measurement angle 20 °/60 °/85 °, Measurement range 0~2000GU, meets standards ISO 2813, ASTM D523, ASTM D2457, ASTM C584, AS 1580 (602.2), BS 3900 D5, DIN 67530, JIS Z 8741, ISO 7668, MFT 30064

Introduction

TQC 20°, 60°, 85° three-angle gloss meter GL0030 can measure the full range of gloss. The 85° angle can measure low-gloss surfaces (high diffuse reflection) or matte surfaces.

Special feature

Suitable for any platform, the imported TQC three-angle gloss meter allows users to quickly and easily measure accurate gloss levels.

Suitable for measuring a variety of materials, whether paper, plastic, paint, wood or any other material,

Fool-like operation requires no special training or skills, and the results can be obtained in just a few steps. Users only need to place the three-angle gloss meter at the location to be measured, press the scan button, and then read the value.

Application

Applicable standards

ISO 2813, ASTM D523, ASTM D2457, ASTM C584, AS 1580 (602.2), BS 3900 D5, DIN 67530, JIS Z 8741, ISO 7668, MFT 30064 (45-angle exception).

Features

•Optical stability;

•LED light source;

•OLED display, extremely high visibility and contrast;

•Ergonomic shape for left- and right-handed users;

•USB port;

•Users can calibrate themselves;

•Menu operation.

warranty period

The warranty period is 12 months.

Instructions

No special training or special skills are required. Place the instrument on the object to be measured, press the "scan" button and take a reading. If you want to know the functions of the GL0010 gloss meter software, please read the introductory article " About TQC Gloss Meter Software Interface " in the NBCHAO Knowledge Base .

safety precaution

•Do not use it in an environment with too high or too low temperature.

•Keep the triangular gloss meter dry.

special care

•Although the material is sturdy, this three-angle gloss meter is a precision instrument and cannot be dropped or knocked.

•Keep it clean and tidy.

•Use a soft, dry cloth to clean the instrument. Do not use other materials such as wire brushes and sandpaper to clean the instrument. Use of detergents may cause lasting damage.

•Do not use compressed air to clean the instrument.

•When the triangular gloss meter is not in use, keep it in its case.

•We recommend annual calibration.

Product actual pictures

Trusted authentication certificate

Take you into the Dutch TQC

Packing list：Host x1, AA battery x2, plastic box x1, screw driver x1, USB disk x1 with TQC analysis software stored, microfiber cleaning towel x1, USB interface cable x1, calibrated certificate x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.