China

ZKP Ipre SR100 Standard Sensors

SE
$319.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con

Ipre SR100 Standard SensorsSPEC

Ipre SR100 Standard SensorsDetails

Ipre SR100 Standard SensorsPacking list

SKU
NB031707
name
Standard Sensors
application
Roughness measurement of planar and cylindrical surfaces
Specifications
The minimum diameter of the hole is 5mm and the maximum depth is 22mm when measuring the inner surface of the hole.
SR100
Standard Sensors
ZKP Ipre SR100 Standard Sensors Picture

sensor type

  • Using the IPREB RS 100 standard sensor, it can measure the roughness of plane and cylindrical surfaces, and can measure the minimum diameter of the inner hole of 5mm and the maximum depth of 22mm.

  • Using the IPRERS110 curved surface sensor, it can measure the roughness of the concave-convex workpiece surface with a curvature radius greater than 6mm, and can also measure suitable planes and cylinders. The IPRE RS110 curved surface sensor needs to be used with the IPREO TA620 measuring platform.

  • Using the IPREORS 120 small hole sensor, it can measure the surface roughness of the hole with a diameter greater than 2mm, the maximum depth is 9mm, and it can also measure the plane and cylinder. IPRE@ RS120 small hole sensor needs to be used with IPREB TA620 measuring platform.

  • Using the IPRE@ RS130 groove sensor, it can measure the surface roughness of grooves with a groove width greater than 2mm and groove depth less than 3mm, or steps with a height less than 3mm, and can also measure planes and cylinders. IPRE'RS130 groove sensor needs to be used with IPREBTA620 measuring platform.

  • Using the IPREE RS131 deep groove sensor, it can measure the surface roughness of grooves with a groove width greater than 3mm and groove depth less than 10mm, or steps with a height less than 10mm, and can also measure planes and cylinders. IPRE@RS131 deep groove sensor needs to be used with IPREBTA620 measuring platform.


Sensor Specifications

RS100 standard sensor
Zhongke Prius SR100 standard sensor details Figure 1		Zhongke Prius SR100 standard sensor details Figure 2
Using the IPRE RS 100 standard sensor, it can measure the surface roughness of plane and cylinder. When measuring the inner surface of the hole, the minimum diameter of the hole is 5mm, and the maximum depth is 22mm.
RS110 Surface Sensor
The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 3		The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 4
Using the IPRE RS110 standard sensor, it can measure the surface roughness of concave-convex workpieces with a radius of curvature greater than 6mm. It can also measure suitable planes and cylinders, and it can be used with a platform.
RS130 groove sensor
The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 5		The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 6
Using the IPRE RS 1 30 standard sensor, it can measure the surface roughness of grooves with a groove width greater than 2mm and groove depth less than 3mm, or steps with a height less than 3mm. It can also measure planes and cylinders, and it can be used with platforms.
RS131 deep slot sensor
The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 7		The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 8
Using the IPRE RS131 standard sensor, it can measure the surface roughness of grooves with a groove width greater than 3mm and groove depth less than 10mm, or steps with a height less than 10mm. It can also measure planes and cylinders, and it can be used with platforms.
RS120 small hole sensor
The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 9		The details of the standard sensor of Zhongke Prius SR100 are shown in Figure 10
Using the IPRE RS120 small hole sensor, it can measure the inner surface roughness of the hole with a diameter greater than 2mm, the maximum depth is 9mm, and it can also measure the flat cylindrical surface.


FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
Knowledge
Standard
Filter Brand Store Contact