IPRE Ipre SR130 Groove Sensors

SR130

Groove Sensors

Sensor type

• With the IPREB RS 100 standard sensor, the roughness of flat and cylindrical surfaces can be measured, and the minimum diameter of the inner hole is 5 mm and the depth is up to 22 mm.

• IPRERS110 The IPRE RS110 curved surface sensor can be used with the IPREO TA620 measurement platform to measure the roughness of the uneven surface of the workpiece with a radius of curvature greater than 6mm, as well as the suitable flat and cylindrical surfaces.

• With the IPREORS 1 20 small hole sensor, the roughness of the inner surface of the hole with a hole diameter greater than 2 mm can be measured, with a maximum depth of 9 mm, and flat and cylindrical surfaces can also be measured. IPRE@ RS120 small bore sensor is required for use with the IPREB TA620 measurement platform.

• With the IPRE@ RS130 groove sensor, the surface roughness of grooves with a groove width of more than 2 mm and a groove depth of less than 3 mm, or steps with a height of less than 3 mm can be measured, as well as flat and cylindrical surfaces. The IPRE'RS130 trench sensor is designed for use with IPREBTA620 measurement platforms.

• With the IPREE RS131 deep groove sensor, the surface roughness of grooves with a groove width greater than 3 mm and a groove depth of less than 10 mm, or steps with a height of less than 10 mm can be measured, as well as flat and cylindrical surfaces. IPRE@RS131 deep groove sensors need to be used with IPREBTA620 measurement platforms.

Sensor specifications

RS100 standard sensor
	Using the IPRE RS 100 standard sensor, it is possible to measure the surface roughness of flat and cylindrical surfaces, with a minimum diameter of 5 mm and a maximum depth of 22 mm when measuring the inner surface of the hole.
RS110 curved surface sensor
	Using the IPRE RS110 standard sensor, it can measure the surface roughness of concave and convex workpieces with a radius of curvature greater than 6mm, and can also measure suitable flat surfaces and cylindrical surfaces for use with platforms.
RS130 trench sensor
	The IPRE RS 1 30 standard sensor can measure the surface roughness of grooves with a groove width greater than 2 mm and a groove depth of less than 3 mm, or steps with a height of less than 3 mm.
RS131 deep groove sensor
	Using the IPRE RS131 standard sensor, it can measure the surface roughness of grooves with a groove width of more than 3mm and a groove depth of less than 10mm, or steps with a height of less than 10mm, and can also measure flat surfaces and cylindrical surfaces for use with platforms.
RS120 small hole sensor
	With the IPRE RS120 small hole sensor, it is possible to measure the roughness of the inner surface of the hole with a hole diameter greater than 2 mm, with a maximum depth of 9 mm, and it can also measure flat cylindrical surfaces.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.