TQC SP1562 coating Roughness Gauge
SERapid measurement of pulse height on rough surfaces of varnished film. Measurement range 0-3,4mm/0-0.13inch.
$874.00/set
PromotionLoading...
Coupon
Model：
SP1562
Similar products
-
Sand blasting shot peening Roughness Gauge AMITTARI AR-131A shot peening sand blasting, printing anti-corrosion and other industry tests$ 428.00SE -
IPRE RA150 asperity Profile Gauge resolution 0.02μm$ 11738.00SE -
Surface roughness Tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument -
LANDTEK SRT-6210S Roughness Gauge 5μm Radius Needle Data storage function$ 957.00SE -
LANDTEK SRT-6200S Roughness Gauge External Sensors Simultaneous measurement of Ra/Rz/Rq/Rt values$ 742.00SE
TQC sheen SP1562 Coating Roughness GaugeSPEC
TQC sheen SP1562 Coating Roughness GaugeDetails
TQC sheen SP1562 Coating Roughness GaugePacking list
- SKU
- NB000324
- Measurement range
- 0~3,4mm/0~0.13inch
- Resolution
- 1μm
- Accuracy
- ± 5µm / 0.2 mil
- bracket diameter
- 20 mm / 0.79 inch
- Power
- Type LR44 1.5 V
SP1562
Coating Roughness Gauge
Rapid measurement of pulse height on rough surfaces of varnished film. Measurement range 0-3,4mm/0-0.13inch.
Introduction
The TQC SP1562 roughness meter is simple to measure and can quickly measure the pulse height of the rough surface.
Specifications
| model | SP1562 |
| Measuring range | 0-3,4mm/0-0.13inch |
| resolution | 1um/0.04mil |
| Accuracy | ± 5µm / 0.2 mil |
| stent diameter | 20 mm / 0.79 inch |
| Battery | Type LR44 1.5 V |
,
Actual pictures
Take you into the Dutch TQC
FAQ
QAre all coatings Roughness Gauges available for inspection in the GB/T 6060.5 standard?
A
Not necessarily, but this SP1562 coating Roughness Gauge can be considered.
QDoes this Dutch Roughness Gauge have a warranty period?
A
Hello, yes, the warranty period is 1 year.
Knowledge
- 1On surface roughness Measuring method Optical inspection, Mechanical, Atomic Force Microscope (AFM)
Standard
- 1GB/T 45767-2025《Silicon nitride ceramic subtrates》
- 2JJF 1105-2018《Calibration Specification for Contact(Stylus)Instruments of Surface Roughness Measurement by Profile Method》
- 3JJG 2018-1989《Measuring Instruments for Surface Roughness》
- 4GB/T 28210-2024《Thermal-sensitive paper》
- 5HB 6172-1988《General surface roughness》
- 6GB/T 42671-2023《Test method for surface roughness of carbon materials》
- 7JJG (轻工) 52-2000《Verification Regulation of Roughness Tester for Paper and Board》
- 8GB/T 13288.2-2011《Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure》
- 9GB/T 6060.5-1988《Metal asperity comparison specimens, shot throwing (spraying), sand blasting machined surfaces (neq ISO 3632-II: 1985)》