ZHONGKEBODA BD/LD-XTP six-degree space vibration test bench

BD/LD-XTP

Six-dimensional vibration test bench

First, the use of the product

Because any product will collide and vibrate during transportation, use, storage, etc., so that the product will be defective in a certain period of time, seriously affecting the use of the product and unnecessary economic losses, in order to avoid the occurrence of this situation, we must know the vibration resistance life of the product or the components in the product in advance.

Second, the role of the vibration testing machine

1. The strength of the structure

2. Loosening of binders

3. Protect the wear and tear of the material

4. Breakage of parts

5. Poor contact of electronic components

6. Circuit short circuit and intermittent instability

7. The standard value of each part is offset

8. Screen the defective parts in advance

9. Find the resonance relationship between parts, structure, packaging and transportation process

3. Advantages of using vibration testing machines

a. When designing, the damage point and the defective point can be analyzed

b. In terms of quality, the differences and defects produced by each batch of products can be analyzed

c. During production, it can be completely vibrated and measured at the same time, so that the defective rate of the product can be detected early.

d. Durability measurement, so that the product is durable and the non-durable components can be improved in advance, and the company's brand reputation will be better.

Fourth, product features

1. The automatic six-degree space all-in-one machine vibrating table BD/LD-XTP (front and back, up and down, left and right) (working on the same table) adopts a 7.0-inch PLC color touch screen controller, which is simple and easy to understand.

2. Three-axis simultaneous action, two-axis simultaneous action, (two/three) axis continuous action, random action (bandwidth can be set), sine wave (half wave/full wave)

3. Display amplitude acceleration (optional): If you need to see the amplitude, acceleration, maximum acceleration, and accurate figures, you need to purchase a measuring instrument separately;

(1) The amplitude of LD-T1 is 0~2mm/0~199.9m/s2

(2) LD-T3 amplitude 0~10mm/acceleration 0~100m/s2

However, it can only measure a single group of frequencies, and the swept frequency/programmable/frequency doubling/logarithm can only be measured by a vibration analysis system

Packing list：whole machine X1, manual X1, certificate X1, warranty card X1, door-to-door installation X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.