China

YINUO YN-CBY100 Cobb water-absorption Tester

YINUO YN-CBY100 Cobb water-absorption Tester is used to measure the surface water-absorption of sizing paper and Cardboard including corrugated fibreboard, YN-CBY100 Cobb water-absorption Tester test area 100cm2 +/- 0.2cm2, sample area 122.718 +/- 0.2cm2, liquid height 10mm, water consumption 100ml +/- 5ml, pressure roller length 200mm +/- 0.5mm.
Model:

YiNuo YN-CBY100 Cobb water-absorption TesterSPEC

YiNuo YN-CBY100 Cobb water-absorption TesterDetails

YiNuo YN-CBY100 Cobb water-absorption TesterPacking list

SKU
NB033140
test area
(100±0.2)cm²
test area
(122.718±0.2)cm²
Liquid height
10mm
test water consumption
100ml±5ml
Roller length
200±0.5mm
Roller Mass
10±0.5kg
Cup material
316 #stainless steel
Cup lid material
Mg aluminum material, fully enclosed anode hardening process
Sealing ring material
Pure silicone sealing ring
Cup lid knob cover material
304 #stainless steel, swirl/spin design, - second opening and closing
Cup body swirling/spinning position
Pure copper material, with wear resistance performance
Dimensions
396*315*300mm
Weight
About 28kg
YN-CBY100
Cobb water-absorption Tester
YINUO YN-CBY100 Cobb water-absorption Tester Picture

use

Paper and cardboard absorbency Tester is a conventional instrument for the water absorption test of paper and cardboard surface, also known as paper surface absorption gravimeter. This instrument uses the Cobb test method, which is one of the many methods of absorption testing, so it is also called the erection Tester.

This instrument is mainly used to determine the surface water absorption of sizing paper and cardboard, including corrugated cardboard. This instrument only measures the water absorption of paper and cardboard surfaces, but is not suitable for accurately evaluating the writing properties of paper or cardboard.

Definition of surface water absorption (Cobb) value of paper and cardboard: the amount of water absorbed by the surface of paper and cardboard per unit area under a certain pressure and temperature within a specified time, measured in g/㎡. The specific formula is as follows: C=(G2-G1)×100.

where: C - the value of water absorption;

G2 —— The mass of the specimen weighed after water absorption;

G1 —— The quality of the specimen weighed before water absorption.

FAQ
QDoes the Cobb water-absorption tester meet the QB/T2693 specification?
A Model YN-CBY100 Cobb water-absorption tester Compliant
Knowledge
Standard