United States

Defelsko SPG S1 split Roughness Gauge

SE
Defelsko positector SPG S1 Roughness Gauge is a standard Surface Roughness Tester of the positector SPG S series. Its probe is external, Measurement range is 0~500μm, Measurement accuracy +/- 5μm + 5%.
$1019.00/set
PromotionLoading...
Coupon
Certificate
Contact
Details SPEC Con OI
Similar products

Defelsko Standard SPGS1-E Surface profile measuring instrumentSPEC

Defelsko Standard SPGS1-E Surface profile measuring instrumentDetails

Defelsko Standard SPGS1-E Surface profile measuring instrumentPacking list

SKU
NB003345
Display mode
digital display
Measurement range
0~500μm(0~20mils)
Error of indication
± (5 μm + 5%) ± (0.2mil + 5%)
Sensors - Radius
50µm
Sensors - Angle
60°
Measurement profile
Surface roughness profile
Data storage
250 readings
Interface
USB
Power
3 * Battery
Dimensions
137*61*28mm
Product Weight
140G (without battery)
Applicable standards
ASTM D4417-B、AS 3894.5-C、U.S. Navy NSI 009-32、SANS 5772等
type
Standard type
Probe type
PRBSPGS split
application
Sand blasting steel
Standard SPGS1-E
Surface profile measuring instrument
Defelsko SPG S1 split Roughness Gauge Picture

Introduction to the SPGS1 Split Roughness Tester

Unlike the SPG series, the Defelsko SPG S-Series Surface Roughness Tester is a split probe type, in that the main unit and probe are separated, making it easy to measure the surface roughness of some hard-to-access areas. positector SPG S1The surface profiler is a standard type with a high-resolution color LCD display that can store 250 measurement readingsSandblasted steel industry tested.

Illustration of the SPGS1 split surface profiler


Introduction of the Defelsko SPGS1 split surface profiler

Defelsko SPGS1 Split Roughness Tester Appearance Advantages

Detail drawing of the Defelsko SPGS1 Split Roughness Tester probe in the United States

Defelsko SPGS1 Split Roughness Tester Accessories Drawing

The Defelsko SPGS1 Split Roughness Tester has a wide range of compatibility

SPGS1 Split Surface Profiler Features

1) The data storage capacity is 250 readingsDefelsko SPGS1 Split Roughness Tester Host Compatibility

2）With a fast measurement speed of over 50 readings per minute, it is suitable for fast and accurate surface roughness measurements in large, flat areas

3）Alumina wear surface and tungsten carbide stylus tip for long life and continuous accuracy – field replaceable

4) MatchingShock-absorbing rubber protective holster, belt clip and wrist strap

5）Built-in temperature compensation ensures measurement accuracy

6）The calibration certificate is traceable to the PTB

7) Contains glass calibration zero plate and metal gasket

8) The host is multi-purpose,Compatible with all Positector 6000, 200, DPM, UTG, RTR, and SPG probes, the positector panel can easily go from a layer Thickness Gauge to a dew point gage, surface profile gage, or powder wall thickness gage.

Comparison of parameters of the Defelsko Positector SPG series

ModelSPGSPG SSPG CS

Defelsko Positector SPG Surface Profile Roughness TesterDefelsko Positector SPG S Surface Roughness TesterDefelsko Positector SPG CS Surface Roughness Tester
Standard modelSPG1SPG S1SPG CS1
Premium modelSPG3SPG S3SPG CS3
probePRBSPGPRBSPGSPRBSPGCS
applySandblasted steelTextured paint
Measuring range0~500 μm (0~20 mils)0~1500 μm (0~60 mils)
precision± (5 μm+5%)  ± (0.2mil+5%)
Stylus end angle60 degrees60 degrees
Stylus end radius50μm (2mils)500μm (20mils)
FAQ
Q130Mm deep, 44mm diameter cylinder bottom plane position can be asperity?
A The probe can't fit in.
QMeet GB/T13288.2 surface profile measuring instrument
A Standard SPGS1-E surface profile measuring instrument, please refer to
QDoes the purchase of PosiTector SPG machine come with a calibrated certificate?
A Yes, all PosiTector SPG probes include a calibrated certificate
Knowledge
Standard
Filter Brand Store Contact