China

QXD0-50 Grindometer YONGLIDA Fineness range 0-50μm Graduation 5μm

SE
Single-channe, range 0~50μm, scale unit μm, scraper material Cr12 molybdenum vanadium, scraper size 155 * 50 * 13mm, applicable standard GB/T1724, Graduation 5μm.
$125.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

YongLiDa QXD0-50 GrindometerSPEC

YongLiDa QXD0-50 GrindometerDetails

YongLiDa QXD0-50 GrindometerPacking list

SKU
NB003365
Scraper type
Single-channe
Number of grooves
1
range
0 ~ 50µm
Scale unit
mm
Scraper material
Cr12 molybdenum vanadium
Scraper size
155*50*13mm
Applicable standard
GB/T1724
Graduation
5μm
QXD0-50
Grindometer
Single-channe, range 0~50μm, scale unit μm, scraper material Cr12 molybdenum vanadium, scraper size 155 * 50 * 13mm, applicable standard GB/T1724, Graduation 5μm.
QXD0-50 Grindometer YONGLIDA Fineness range 0-50μm Graduation 5μm Picture

Introduction of QXD0-50 Fineness of Grind Gauge

Yongli QXD0-50 Fineness of Grind Gauge is a single-slot Fineness of Grind Gauge designed with molybdenum vanadium material. The fineness range is 0-50μm, and the graduation value is 5μm. QXD0-50 Fineness of Grind Gauge complies with GB/T1724 standard.

Application of QXD0-50 Fineness of Grind Gauge

It is used to determine the fineness of particles such as pigments and impurities in paints and varnishes.

Display diagram of QXD0-50 Fineness of Grind Gauge

Yongli QXD0-50 Fineness of Grind Gauge display

FAQ
QSingle-channe, can I use an extra doctor blade with a maximum offset ink of 50?
A Can't get an extra doctor blade
QThis Energy Chocolate Density, Right?
A You can measure chocolate fineness, not density.
QCan the Fineness of Ground Gauge Meet the GB/T1724 Standard?
A Hello, satisfied.
QMeet JB/T9385 Fineness gauge
A QXD0-50 Fineness gauge, please refer to it.
QCan the QXD50 Fineness gauge be used to scrape slurry up to and including 38 microns?
A Suitable, the scraper fineness Measurement can scrape 0~ 50 μ m or less material fineness.
QWhat instrument is used for the measurement of the size of solid aggregates in the slurry?
A This type of scraper Fineness meter can determine the Fineness in the slurry. The scraper Fineness meter method is an accurate, fast and easy-to-operate method. The specific model selection can be based on your estimated slurry Fineness. For details, please consult the technical engineer of NBchao. Com Mall.
QCan this instrument be used to determine the Fineness of silver and platinum slurry?
A Yes, not only silver and platinum slurries, but also most precious metal slurries can be determined by a scraper Fineness meter.
Standard
Filter Brand Store Contact