China

INESA WYA-3S digital Abbe refractometer 8 measurement modes

SE
High-accuracy temperature transducer and built-in flow tank (can be equipped with thermostatic Water Bath), with corrosion-resistant hard Glass prism and imported LED light source, to achieve accurate and fast determination of refractive index, Brix value and dry percent solids of very small samples
$2036.00/set
PromotionLoading...
Coupon
Model:

INESA WYA-3S Digital Abbe refractometerSPEC

INESA WYA-3S Digital Abbe refractometerDetails

INESA WYA-3S Digital Abbe refractometerPacking list

SKU
NB033672
ND Measurement range
1.30000~1.72000nD
ND resolution
0.00001nD
An indication of nD error
±0.0002nD
Measurement mode
8
Display range
-20~120℃
Display
Color LCD touch screen
communication interface
RS232/USB
Printer model
CK NT-T24S (optional)
Data storage
500 sets
Power Supply
220V±22V,50Hz±1Hz
Dimension
330*180*380mm
Net Weight
10Kg
Brix resolution
0.01%Brix
Brix error of indication
±0.1%Brix
Brix Measurement range
0~100% Brix
WYA-3S
Digital Abbe refractometer
High-accuracy temperature transducer and built-in flow tank (can be equipped with thermostatic Water Bath), with corrosion-resistant hard Glass prism and imported LED light source, to achieve accurate and fast determination of refractive index, Brix value and dry percent solids of very small samples
INESA WYA-3S digital Abbe refractometer 8 measurement modes Picture

Introduction

  • The prism is made of hard glass, which is corrosion and scratch resistant. The measurement requires few samples, which can meet the measurement of precious samples.

  • The high-precision temperature sensor is used to make the temperature measurement more accurate, and the built-in flow cell can be equipped with a special constant temperature Water Bath to meet the measurement at a constant temperature.

  • WYA-3S can determine the refractive index nD of transparent and translucent liquids and solids, and the mass percentage (Brix) of sucrose, glucose, F42 and F55 fructose syrup. dry solids content of fruit juices, vegetables, soft drinks, canned products; Honey water content. Adopt visual aiming, color LCD touch screen display, friendly man-machine interface, intuitive and easy to understand, measurement data can be saved. Temperature correction can be performed by measuring the hammer degree. The original imported LED light source has a high stability of 589nm wavelength (which can ensure the long-term accuracy of the instrument), no temperature rise, small size, low power consumption, high brightness, and ultra-long life; The special optical path structure is used to ensure that the instrument improves the measurement accuracy, and is easy to operate and fast aiming.

  • WYA-3S establishes communication with PC via USB, saves data, connects to the printer via RS232, and prints data.


FAQ
QAbbe refractometer can measure solid transparent Resin handle?
A It can be measured, but the Sample size has certain processing requirements, the thickness must be greater than 3 mm, there must be a 90 ° right angle and two right-angle surfaces must be polished.
QIs it okay to test the membrane and some Resin liquids with solvents?
A If it is a transparent or translucent liquid, all models can be used. If it is yogurt-like, you can only use a fully automatic film. The thickness should be at least 3mm to measure.
QUsed to measure the refractive index of the film, can a very thin almost transparent film be used?
A Most of them can be tested. It is best to send samples for testing.
QMeasure the refractive index of transparent plastics, is there a recommendation?
A Is this suitable?
QCan the refractometer measure the refractive index of the lens? Glasses sheet on both sides, one side is convex and the other side is concave
A No. There needs to be a plane.
QCan this one measure the glue refractive index?
A OK
Knowledge