RDS 70 #3/8 "Film Applicator 160μm colorants

Integrated molding, continuous wire easy maintenance, high accuracy, stainless steel corrosion and durable, suitable for paint paste, colorants, glue and other sample film scraping sample.

$161.00/piece

PromotionLoading...

Coupon

Model：

70# 3/8"

Certificate

RDS

Contact

Details SPEC Con VIDEO CAT OI

RDS 70# 3/8" Applicator rod 3/8 "SPEC

RDS 70# 3/8" Applicator rod 3/8 "Details

RDS 70# 3/8" Applicator rod 3/8 "Packing list

SKU: NB033731

Production process: Formed

WFT: 160µm

diameter: 9.52mm

Total length: 400mm

Application width: 300mm

Material: 不锈钢

70# 3/8"

Applicator rod 3/8 "

Integrated molding, continuous wire easy maintenance, high accuracy, stainless steel corrosion and durable, suitable for paint paste, colorants, glue and other sample film scraping sample.

RDS 70 #3/8 "Film Applicator 160μm colorants Picture

Product description

RDS has developed a 3/8 diameter film wiper that is easy to clean and has no wires, which is in line with the current choice trend of domestic (CN) new wire rod users. The film coating effect of the forming type RDS scraper is the same as that of the wire winding type, but due to the difference in the shape of the groove, there is a slight difference in the amount of coating. RDS70# 3/8'' color paste scraper is suitable for sample coating film scraping of samples such as lacquer paste, color paste, glue paste, etc. The thickness of the coating film is 160.0μm, and the effective coating width is 30cm.

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10

FAQ

QWhat is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?

A The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.

QMoulding rod is better for winding or extrusion?

A In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.

QCan this cable stick be matched with a Film Applicator?

A Whether it can be matched with the Film Applicator depends on the film width of the Film Applicator. Most Film Applicator film widths on the market are less than 40cm, and the rod diameter is less than 10mm, so it is suitable. But if the Film Applicator is specially customized, or the width exceeds 40cm, you need to choose a longer rod. For customization, please consult NBchao.

QDo you support customization? Such as wet film thickness and length?

A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.

Standard

Filter Brand Store Contact