Determination of Microcomputer Coefficient of Friction Tester static and dynamic coefficient of friction

PY-E612

Coefficient of frictIon Meter

Measurement range 0~1, accuracy +/- 0.001N, can measure the dynamic and static coefficient of friction, suitable for high-speed production online Encasement material smoothness test.

PY-E612 microcomputer friction coefficient Tester, friction coefficient testing machine is suitable for measuring the static friction coefficient and dynamic friction coefficient of printing and packaging materials and plastic films and glass products, by measuring the friction coefficient of materials, to further strengthen the determination of the slippery properties of plastic films, especially packaging films, and is a reliable testing instrument for papermaking, packaging industry, medical industry, quality inspection institutions and other departments.

Microcomputer friction coefficient Tester, static and dynamic friction coefficient Tester (plane method) is suitable for packaging and printing paper film surface slip performance test, to detect the friction between the two surfaces of the pharmaceutical packaging paper and the test material and the ratio of the vertical force acting on one of its surfaces, and the friction performance of the material can be expressed by the dynamic and static friction coefficient of the material. The surface slip performance of packaging printing materials is tested by testing its dynamic friction coefficient and static friction coefficient index, so that it can be smoothly conveyed and packaged on the high-speed production line to meet the needs of high-speed product packaging.

According to the standard

GB/T 17200、GB/T 22895、ISO 8295、ASTM D1894、TAPPI T816、GB/T 2792

Operating Principle

The strip test sample is clamped with a sample clamp, and the slider is wrapped with the sample to be measured at the same time, and then the slider is placed on the hanging hole of the sensor, and under a certain contact pressure, the rack is driven by the motor to move the sensor, that is, the two test surfaces are moved relatively. The force signal measured by the sensor is amplified by the integrator and fed to the Recorder, where the dynamic and static friction coefficients are recorded separately.

Packing list：host X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.