Mayer film preparatory principle, preparatory wet paint 96μm, 3/8 inch diameter, 40cm Total length, film width 30cm, wire-wound diameter 1.07mm.
Packing list:Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QSpreader film thickness of about 22um, solid containing 55, how many wire rod should be used?
A
RDS 42 #3/8 "wire rod.
QDo you support customization? Such as wet film thickness and length?
A
Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QI need to buy wire rods, with a total length of 400 and a diameter of 9.5. The wet film requires about 85 and 95.
A
Hello, you can choose RDS 38 #3/8 "and RDS 42 #3/8".
QDo you have the Applicator rod required in GB/T13217.7 standard?
A
This 42 #3/8 "Applicator rod will do.
QWhich one should we choose if we want to scrape 20μm? The solid content is 21%.
A
It is recommended that you choose No. 42 rod with a film thickness of 96μm. If according to the data you provided, the solid content is 21%, and the theoretically prepared dry film is 20μm.