YINUO YN-DLY-S Carton Dropping Tester (wings) 1300mm 100kg

YN-DLY-S

Carton Dropping Tester (wings)

It is used to detect the ability of the carton to protect the product when it is suddenly dropped during transportation or handling. Photoelectric control can set the seven-level drop height, and can also choose the drop height freely. The drop height is 400~1500mm, and the weight is 100kg.

Instrument use

YN-DLY carton drop test machine is measured by simulating the carton drop in daily life. It can reproduce the damage of the product when it falls from a high altitude. It is mainly used to detect the sudden drop of the carton during transportation or handling. Product protection Ability. This machine adopts photoelectric control, which can set seven levels of drop height, and the drop height can also be freely selected. The drop release adopts electromagnetic control, which can make the sample drop freely in an instant to conduct drop impact tests on the edges, corners, and planes of the packaging container. It is used to detect the protection quality of carton packages and bags. It is a detection tool for carton manufacturers and carton users to control quality.

Principle

The principle of dangerous goods drop test: Lift the test sample to a predetermined height, then make it fall freely according to the predetermined state, and collide with the impact table.

Executive standard

GB4857.5 "Vertical impact drop test method for basic tests of transport packages"

technical features

1. The equipment can perform a free drop test on all corners and edges of the package. It is equipped with a digital display height indicator and a decoder to track the height, so that the product drop height can be quickly and accurately given, which is consistent with the preset drop height. The height error will not exceed 2%.

2. It adopts a single-arm double-column structure, with electric reset, electric control drop and electric lifting device to ensure that users can operate more conveniently; the unique hydraulic buffer device greatly improves the service life, stability and safety of the machine. The arm setting can conveniently place the product, and the angle error between the impact surface of the drop angle and the plane of the bottom plate will not be greater than 5°.

3. The unique hydraulic buffer device greatly improves the service life, stability and safety of the machine.

4. Reinforced fuselage design, it is currently the most stable performance and most valuable device on the market.

Precautions

1. Keep the machine clean before and after the test.

2. The placement environment is suitable for room temperature to below 45°C and a well-ventilated and non-corrosive environment.

3. The instrument cannot be used to test products with volatile, fragile, explosive, and corrosive gases.

4. The "emergency stop" button is to prevent improper operation and when it is too late to close all control operation keys, just press this button to cut off the power supply of all control keys and stop the operation of the instrument. Rotate in the direction of the arrow to release the emergency stop state and return to normal.

Application

Mainly applicable to: impact strength test of paper bags, film flexible packaging bags, carton packages, plastic boxes, wooden boxes, electronic parts, furniture and home appliances, office supplies, ceramic lighting and other product packages, widely used in the export inspection of dangerous packages, enterprises Product factory quality verification.

Packing list：host X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.