China

BIO0021 Alto TOC Laboratory Water Purification System

Model:
Certificate

BIOFIL Alto TOC Laboratory pure water systemSPEC

BIOFIL Alto TOC Laboratory pure water systemDetails

BIOFIL Alto TOC Laboratory pure water systemPacking list

SKU
NB034706
distribution rate
2L/min
Electrical resistivity
18.2MΩ·cm
TOC content
1~5ppb
bacteria
<1cfu/ml
Feed water Mass
<30μs/cm
water supply pressure
0.1~6bar
Alto TOC
Laboratory pure water system
BIO0021 Alto TOC Laboratory Water Purification System Picture

Introduction

Alto mainly produces high-grade pure water with a resistivity of 18.2MΩ-cm. The supply water of this system needs to come from a treated water source, and fresh pre-treated water can be produced into Grade I water in a timely manner as needed. There are two water dispensing methods to choose from, the integrated smart water dispenser and the remote mobile water distributor. The water dispensing speed can reach 2 liters per minute. At the same time, you can also set the water volume and distribution speed you need on the water distributor through intuitive and simple software controls, and the water distributor will accurately discharge water according to the amount and speed. The consumables of the Alto pure water system also have the advantages of being easy to replace and durable. 

Alto can produce 120 liters of laboratory grade I water per hour (when the supply water is sufficient). Grade I water is a higher level of pure water in the laboratory. It is mainly used in molecular biology, electrophoresis, cell and tissue culture, sequencing, HPLC, genetics, pharmacology and any other application fields with strict requirements.

In some experiments, organic matter is likely to affect the experimental results, so it is necessary to monitor the TOC (total organic carbon) in the water. This system is equipped with a TOC Detector which will provide you with excellent assurance of your water use.

Features

*Ultrapure water can be dispensed at rates up to 2 liters per minute

*The UV in the quartz sleeve can emit dual-wavelength ultraviolet rays of 185nm and 254nm

*Get water at any time, ready to use

*Endotoxin-free, pyrogen-free

*Removable remote diverter available

*Easy to replace consumables and low replacement cost

*The operating software is simple and intuitive

*Run quietly

*Can be installed above the workbench, below the workbench, and on the laboratory wall

*Comprehensive water quality monitoring, including TOC monitoring

Environmental innovation:

This model of water purifier has low energy consumption, and the power consumption of running one Alto water purifier is only equivalent to that of a household light bulb. As a result, the system helps reduce pollution, protects valuable natural resources, and saves money.

Details of Jite Alto TOC Laboratory Water Purification System Figure 1

FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.