China

XIONGFA XF-1005MB halogen Fast Moisture Analyzer 100g/180 ℃

SE
Maximum weighing value 0.005~ 100g, moisture readability 0.02%, moisture measurement range 0.02~ 100.00%, weighing Sensors domestic (CN), heating temperature range 180 ℃, data storage 10 groups, sample plate φ 85mm
$357.00/set
PromotionLoading...
Coupon
Model:
Certificate

XIONGFA XF-1005MB Halogen Fast Moisture AnalyzerSPEC

XIONGFA XF-1005MB Halogen Fast Moisture AnalyzerDetails

XIONGFA XF-1005MB Halogen Fast Moisture AnalyzerPacking list

SKU
NB034718
Maximum weighing value
0.005~100g
Water readability
0.02%
Moisture range
0.02~100.00%
Weighing Sensors
Domestic (CN)
Heating temperature range
180℃
data storage
10 groups
Sample tray
Φ85mm (material aluminum, can be washed and used repeatedly)
Test method
Automatic/Manual/Timing
test data
Moisture content, dry-wet ratio (Solid content), Weight (before and after drying), wet Weight ratio, moisture regain
Communication interface
Standard RS232 interface
Baud rate
9600/S bit
Power
Voltage 220V ± 10% Frequency 50HZ ± 1HZ
Display
5 inch touch screen display
Product size
370*215*195mm
Dimensions
445*300*330mm
Net Weight
3.5kg
Gross Weight
4.5kg
XF-1005MB
Halogen Fast Moisture Analyzer
Maximum weighing value 0.005~ 100g, moisture readability 0.02%, moisture measurement range 0.02~ 100.00%, weighing Sensors domestic (CN), heating temperature range 180 ℃, data storage 10 groups, sample plate φ 85mm
XIONGFA XF-1005MB halogen Fast Moisture Analyzer 100g/180 ℃ Picture

Introduction

XF series rapid moisture analyzer is a new type of rapid moisture analyzer, which can be used to determine the moisture content of any substance (except for substances that undergo dangerous chemical reactions through heating). At the same time, the halogen heating unit and the moisture evaporation channel dry the samples quickly. During the drying process, the instrument continuously measures and immediately displays the moisture content % lost in the sample during the drying process. After the drying is completed, the final measured moisture content is locked. Press the switch button to observe the moisture value, weight initial value, initial value, test data such as time.

Halogen Moisture Meter can be used in all industries that need to measure moisture quickly, such as medicine, food, tobacco, chemical industry, tea, food, textile, agriculture and forestry, etc. The Moisture Meter can communicate with the computer, and print out the test moisture data results through the computer, or directly print out the test moisture data results through the optional printer.

Xiongfa XF-1005MB Halogen Moisture Analyzer Details Figure 1

Models

modelWeighing rangemoisture readabilityTest Range
XF-1005MB0.005-100g0.00020.02%-100.00%
XF-1005MA0.005-100g0.00020.02%-100.00%
XF-1102MB0.002-110g0.00010.01%-100.00%
XF-1102MA0.002-110g0.00010.01%-100.00%
XF-1203MB0.001-120g0.00010.01%-100.00%
XF-1203MA0.001-120g0.00010.01%-100.00%
Other parameters
heating temperatureMA is 200°C; MB is 180°C
load cellMA has passed HBM; MB is made in CHINA
Sample pan sizeφ85mm (material aluminum, can be cleaned and used repeatedly)
test methodAuto/Manual/Timing
Test DataMoisture content, dry-wet ratio (solid content), weight (before and after drying), wet weight rate, moisture regain
Communication InterfaceStandard RS232 interface
baud rate9600/S bit
Power supplyVoltage 220V±10% Frequency 50HZ±1HZ
monitor5 inch touch screen display
digital storageMA is 20 groups; MB is 10 groups


FAQ
QAfter reading the manual, I have the following questions: 1. Can acidic substances (mandelic acid powder) be determined? 2. The target moisture content needs to be measured at about 20%. How long is the measurement time? 3. Instrument material? Anti-acid corrosion? 4, mass guarantee?
A The material of the equipment is 304 stainless steel, which is corrosion-resistant.
QIf 5 grams of particles can be measured in how many minutes? 80 ° C, can't the moisture be made within 5 minutes below 0.8%?
A About 7-8 minutes, it cannot be measured within five minutes, and it will take about 7 minutes to complete the experiment.
QPlastic particle moisture content tester requires weighing accuracy: 0.005g, and the result is readable: 0.01%. Is there any suggestion?
A XF1005MB can be tested.
Knowledge
Standard