China

JINGKELIAN QXD 0-100 single-channe Li-ion battery paste Fineness of Grinding Gauge 0-100μm

JINGKELIAN QXD 0-100 single-channe lithium ion battery slurry Fineness of Grinding Gauge can be used for inspection of lithium ion battery slurry, Paints and paint paste inside the pigment, filler and impurity particles such as fineness, QXD 0-100 single-channe scraper fineness Measurement range 0-100μm, Graduation 10μm.
Model：
Certificate
Contact
Details SPEC VIDEO
Similar products

JingKeLian QXD 0-100 Fineness gaugeSPEC

JingKeLian QXD 0-100 Fineness gaugeDetails

JingKeLian QXD 0-100 Fineness gaugePacking list

SKU
NB034735
range
0~100μm
Graduation
10μm
Scraper type
Single-channe
Number of grooves
1
Scale unit
μm
QXD 0-100
Fineness gauge
JINGKELIAN QXD 0-100 single-channe Li-ion battery paste Fineness of Grinding Gauge 0-100μm Picture

Introduction

It can be used to test the fineness of pigments, fillers and impurities in paints and paint slurries, expressed in microns.

Purpose: Determine the particle size of fuel filling and impurities in paints, paint slurries and inks


FAQ
QCan this scraper fineness test latex paint system?
A Yes, it is recommended to select specific specifications according to industry standards.
QI want to check the thickness and quantity of calcium carbonate, is that okay?
A The solid powder that is insoluble in the solution is added to the solution and stirred. Usually, the degree of dispersion can be detected by the Fineness of Ground Gauge, which roughly represents the uniformity of stirring. Powder can theoretically
QI want to measure the cleanliness of emulsion paint. Is this Fineness Meter suitable?
A The number of particles in the emulsion paint above the Fineness meter reading is suitable for indicating the cleanliness of the emulsion paint and is therefore appropriate.
QCan the JINGKELIAN QXD100 Fineness gauge detect paint up to 75 microns?
A Fineness gauge can be scraped below 0-100μm sample fineness.
QWhat specifications of Fineness gauge do primers generally use?
A Fineness requirements for primers are generally not higher than 50μm/60μm, and a Fineness gauge with a range of 0 to 100 can be used, either single-channe or double-channel.
Standard