United States

RDS 44 #3/8 "Mayer Rods WFT 100.6μm Length 400mm

SE
Mayer wire-wound 1.12mm steel Mayer Rods, conventional 3/8 inch diameter, prepative 100μm wet film, Spreader width 30cm, stainless steel.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 44# 3/8" Applicator rod 3/8 "SPEC

RDS 44# 3/8" Applicator rod 3/8 "Details

RDS 44# 3/8" Applicator rod 3/8 "Packing list

SKU
NB000035
Production process
wire-wound
WFT
100.6μm
diameter
9.52mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
Wire diameter
1.12mm
44# 3/8"
Applicator rod 3/8 "
Mayer wire-wound 1.12mm steel Mayer Rods, conventional 3/8 inch diameter, prepative 100μm wet film, Spreader width 30cm, stainless steel.
RDS 44 #3/8 "Mayer Rods WFT 100.6μm Length 400mm Picture

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10



FAQ
QI put it on the pet substrate and scrape it with UV glue. The wire rod has several thicknesses. Can you only have one thickness when you buy a wire rod?
A Different rod numbers correspond to different wet film thicknesses. The thickest is 200um. If you want to scrape 300um wet film thickness, use Film Applicator.
QHello, is a wet film thickness of about 100 microns okay?
A Hello, RDS44 #This Mayer Rods is about 100 microns.
QIs this RDS Mayer Rods twisted?
A Hello, yes, it is wired process.
QCan the coated wire rod be coated with mirror plastic and metal film?
A Hello, the wire rod film is suitable for samples with good flowability and no large particles. You need to confirm the status of your sample before you can see if it is suitable.
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QHello, is this Mayer Rods? How many times do you want to scroll back and forth? Or just roll once?
A Hello, yes, it is hung vertically. Keep the Mayer Rods fixed during the scraping process. You don't need to roll, just scrape it down.
QApplicator rods meet the specifications of GB/T9757?
A Model 44 #3/8 "Applicator rod
QCan silicone coatings be applied to quartz Glass substrates?
A Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.
Knowledge
Standard
Filter Brand Store Contact