United Kingdom

Rhopoint M210 milliohmmeter, ohmmeter

Rhopoint M210 milliohmmeter, ohmmeter range 1.999 Ohm, 19.99 Ohm, 199.9 Ohm (automatic selection), increment 0.001 Ohm, 0.01 Ohm, 0.1 Ohm, accuracy +/- 0.1% of current range, zero offset +/- 0.001 Ohm, maximum Voltage 1.4V, maximum current 5mA
Model：
Contact
Details SPEC CAT

RHOPOINT M210 milliohmmeterSPEC

RHOPOINT M210 milliohmmeterDetails

RHOPOINT M210 milliohmmeterPacking list

SKU
NB035276
range
1.999 ohms, 19.99 ohms, 199.9 ohms (automatic selection)
increment
0.001Ω, 0.01Ω, 0.1Ω
Accuracy
+/- 0.1% of current range
zero offset
±0.001Ω
Maximum Voltage
1.4V
Maximum current
5mA
Temperature drift
Minimum range of 0.013%/℃ of
show
Three and a half L.C.D.
Battery
9V (PP3 MN1604 or equivalent)
operating temperature
5~35℃
Weight
510G (including holster and cable)
size
15 * 14.5 * 4.5cm (with leather case), 15 * 8 * 3.8cm (without leather case)
M210
milliohmmeter
Rhopoint M210 milliohmmeter, ohmmeter Picture

This instrument is a portable digital meter that can measure low resistance in the range of 0.001Ω to 200Ω. Higher accuracy can be achieved by utilizing a four-wire input to eliminate errors caused by test lead length.

The instrument is small and lightweight, making it easy to use with just one hand and can be operated using only one ON button.

It has automatic range, automatic decimal point and automatic shutdown after three minutes. It has long battery life and is powered by a single PP3 or MN1604 battery.

The complete M210 set includes: M210 milliohm meter, a set of spring clamp connectors and leads, leather case and warranty card with UKAS traceable certificate.


  • One of the important features of a milliohmmeter is its very low test current (5mA). This ensures that the contacts being tested are not "cleaned" by the test current . This "cleaning" of the measured contacts can lead to erroneous measurements.

  • In a four-wire "Kelvin" configuration, four wires are used to connect the circuit under test to the instrument.

  • One pair of test wires carries the current generated by the instrument, and the other pair is connected to the Voltage measurement circuit.

  • Current circuits are low impedance and Voltage circuits are high impedance. When connected, current flows through the component or circuit under test and the Voltage drop between the test points is measured.

RHOPOINT M210 milliohmmeter details picture 1

Features

  • 0.1% accuracy

  • Only 5mA test current

  • Single button operation

  • Single button operation

  • Automatically shut down after three minutes

  • 20 continuous operation (uses standard PP3 batteries)

  • Automatic range switching

  • Four line input

  • Comes with leather case

RHOPOINT M210 milliohmmeter details picture 2

typical application

• Relays, switches and connector contacts

• PC-via

• PC trace resistance

• Transformers and motor windings

• Loop circuit testing

• Continuity of ground conductor

• Wire wrap and solder joints

• RFI shielding and coil resistance

• Network Cabling

• Aircraft bonding inspection


FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
Standard