China

QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads

SE
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
$72.20/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT
Similar products

YongLiDa QFH Cross-cut adhesion testerSPEC

YongLiDa QFH Cross-cut adhesion testerDetails

YongLiDa QFH Cross-cut adhesion testerPacking list

SKU
NB003569
Number of teeth
6 teeth
Tooth spacing
1mm、2mm
Application standard
ISO2409、GB/T9286
QFH
Cross-cut adhesion tester
The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads Picture

Introduction of QFH paint film scratch tester

Yonglida QFH paint film cross-cut tester is a manual paint film cross-cut adhesion tester, equipped with two cutting knives, the distance between the knife teeth is 1mm and 2mm respectively. The QFH paint film cross-cut tester is designed according to the ISO2409 standard and is applicable to the GB/T9286 standard. It is mainly used for the determination of the cross-cut adhesion of organic coatings. It can be applied to both the laboratory and the construction site.

Display of QFH paint film cross-cutting instrument

Display picture of Yonglida QFH paint film cross-cutting instrument

FAQ
QTo detect the adhesion lSO2049 of Electrophoresis paint, this scratcher has a knife tooth spacing of 1mm and 2mm, right?
A Hello, yes.
QIs this QFH Cross-Cut Tester ISO 2409 compliant?
A Hello, this Cross-Cut Tester meets the ISO2409 standard.
QCan the YONGLIDA QFH cross-cut adhesion tester meet the ASTMD3359 standard?
A Applicable, you can consult the customer service of the mall for details about the ASTMD3359 standard.
QWhat is the number of teeth of the knife head equipped with the QFH scratcher?
A Hello, this model is equipped with 2 6-tooth cutter heads, and the spacing between the cutter teeth is 1mm and 2mm respectively.
Knowledge
Standard
Filter Brand Store Contact